lkml.org 
[lkml]   [2017]   [Jul]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] eeprom: idt_89hpesx: Support both ACPI and OF probing
Date
From: Huy Duong <qhuyduong@hotmail.com>

Allow the idt_89hpesx driver to get information from child nodes from
both OF and ACPI by using more generic fwnode_property_read*() functions.

Below is an example of instantiating idt_89hpesx driver via ACPI Table:

Device(IDT0) {
Name(_HID, "PRP0001")
Name(_CID, "PRP0001")
Name(_CCA, ONE)
Name(_STR, Unicode("IDT SW I2C Slave"))
Name(_CRS, ResourceTemplate () {
I2cSerialBus (0x74, ControllerInitiated, 1000,
AddressingMode7Bit, "\\_SB.I2CS",
0x00, ResourceConsumer, ,
)
})
Name (_DSD, Package () {
ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () {"compatible", "idt,89hpes32nt8ag2"},
},
})
Device (EPR0) {
Name (_DSD, Package () {
ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () {"compatible", "onsemi,24c64"},
Package () {"reg", 0x50},
}
})
}
}

Signed-off-by: Huy Duong <qhuyduong@hotmail.com>
---
drivers/misc/eeprom/idt_89hpesx.c | 124 +++++++++++++++++---------------------
1 file changed, 54 insertions(+), 70 deletions(-)

diff --git a/drivers/misc/eeprom/idt_89hpesx.c b/drivers/misc/eeprom/idt_89hpesx.c
index ab0df6a..8be64ac 100644
--- a/drivers/misc/eeprom/idt_89hpesx.c
+++ b/drivers/misc/eeprom/idt_89hpesx.c
@@ -1089,101 +1089,85 @@ static void idt_set_defval(struct idt_89hpesx_dev *pdev)
pdev->eeaddr = 0;
}

-#ifdef CONFIG_OF
static const struct i2c_device_id ee_ids[];
+
/*
* idt_ee_match_id() - check whether the node belongs to compatible EEPROMs
*/
-static const struct i2c_device_id *idt_ee_match_id(struct device_node *node)
+static const struct i2c_device_id *idt_ee_match_id(struct fwnode_handle *fwnode)
{
const struct i2c_device_id *id = ee_ids;
+ const char *compatible, *p;
char devname[I2C_NAME_SIZE];
+ int ret;

- /* Retrieve the device name without manufacturer name */
- if (of_modalias_node(node, devname, sizeof(devname)))
+ ret = fwnode_property_read_string(fwnode, "compatible", &compatible);
+ if (ret)
return NULL;

+ p = strchr(compatible, ',');
+ strlcpy(devname, p ? p + 1 : compatible, sizeof(devname));
/* Search through the device name */
- while (id->name[0]) {
- if (strcmp(devname, id->name) == 0)
- return id;
- id++;
- }
- return NULL;
+ while (id->name[0]) {
+ if (strcmp(devname, id->name) == 0)
+ return id;
+ id++;
+ }
+ return NULL;
}

/*
- * idt_get_ofdata() - get IDT i2c-device parameters from device tree
+ * idt_get_fw_data() - get IDT i2c-device parameters from device tree
* @pdev: Pointer to the driver data
*/
-static void idt_get_ofdata(struct idt_89hpesx_dev *pdev)
+static void idt_get_fw_data(struct idt_89hpesx_dev *pdev)
{
- const struct device_node *node = pdev->client->dev.of_node;
struct device *dev = &pdev->client->dev;
+ struct fwnode_handle *fwnode;
+ const struct i2c_device_id *ee_id = NULL;
+ int eeprom_addr;
+ int ret;

- /* Read dts node parameters */
- if (node) {
- const struct i2c_device_id *ee_id = NULL;
- struct device_node *child;
- const __be32 *addr_be;
- int len;
-
- /* Walk through all child nodes looking for compatible one */
- for_each_available_child_of_node(node, child) {
- ee_id = idt_ee_match_id(child);
- if (IS_ERR_OR_NULL(ee_id)) {
- dev_warn(dev, "Skip unsupported child node %s",
- child->full_name);
- continue;
- } else
- break;
- }
-
- /* If there is no child EEPROM device, then set zero size */
- if (!ee_id) {
- idt_set_defval(pdev);
- return;
- }
+ device_for_each_child_node(dev, fwnode) {
+ ee_id = idt_ee_match_id(fwnode);
+ if (IS_ERR_OR_NULL(ee_id)) {
+ dev_warn(dev, "Skip unsupported EEPROM device");
+ continue;
+ } else
+ break;
+ }

- /* Retrieve EEPROM size */
- pdev->eesize = (u32)ee_id->driver_data;
-
- /* Get custom EEPROM address from 'reg' attribute */
- addr_be = of_get_property(child, "reg", &len);
- if (!addr_be || (len < sizeof(*addr_be))) {
- dev_warn(dev, "No reg on %s, use default address %d",
- child->full_name, EEPROM_DEF_ADDR);
- pdev->inieecmd = 0;
- pdev->eeaddr = EEPROM_DEF_ADDR << 1;
- } else {
- pdev->inieecmd = EEPROM_USA;
- pdev->eeaddr = be32_to_cpup(addr_be) << 1;
- }
+ /* If there is no fwnode EEPROM device, then set zero size */
+ if (!ee_id) {
+ dev_warn(dev, "No fwnode, EEPROM access disabled");
+ idt_set_defval(pdev);
+ return;
+ }

- /* Check EEPROM 'read-only' flag */
- if (of_get_property(child, "read-only", NULL))
- pdev->eero = true;
- else /* if (!of_get_property(node, "read-only", NULL)) */
- pdev->eero = false;
+ /* Retrieve EEPROM size */
+ pdev->eesize = (u32)ee_id->driver_data;

- dev_dbg(dev, "EEPROM of %u bytes found by %hhu",
- pdev->eesize, pdev->eeaddr);
+ /* Get custom EEPROM address from 'reg' attribute */
+ ret = fwnode_property_read_u32(fwnode, "reg", (u32 *) &eeprom_addr);
+ if (ret || (eeprom_addr == 0)) {
+ dev_warn(dev, "No EEPROM reg found, use default address 0x%x",
+ EEPROM_DEF_ADDR);
+ pdev->inieecmd = 0;
+ pdev->eeaddr = EEPROM_DEF_ADDR << 1;
} else {
- dev_warn(dev, "No dts node, EEPROM access disabled");
- idt_set_defval(pdev);
+ pdev->inieecmd = EEPROM_USA;
+ pdev->eeaddr = eeprom_addr << 1;
}
-}
-#else
-static void idt_get_ofdata(struct idt_89hpesx_dev *pdev)
-{
- struct device *dev = &pdev->client->dev;

- dev_warn(dev, "OF table is unsupported, EEPROM access disabled");
+ /* Check EEPROM 'read-only' flag */
+ if (fwnode_property_read_bool(fwnode, "read-only"))
+ pdev->eero = true;
+ else /* if (!fwnode_property_read_bool(node, "read-only")) */
+ pdev->eero = false;

- /* Nothing we can do, just set the default values */
- idt_set_defval(pdev);
+ dev_info(dev, "EEPROM of %d bytes found by 0x%x",
+ pdev->eesize, pdev->eeaddr);
}
-#endif /* CONFIG_OF */

/*
* idt_create_pdev() - create and init data structure of the driver
@@ -1203,8 +1187,8 @@ static struct idt_89hpesx_dev *idt_create_pdev(struct i2c_client *client)
pdev->client = client;
i2c_set_clientdata(client, pdev);

- /* Read OF nodes information */
- idt_get_ofdata(pdev);
+ /* Read firmware nodes information */
+ idt_get_fw_data(pdev);

/* Initialize basic CSR CMD field - use full DWORD-sized r/w ops */
pdev->inicsrcmd = CSR_DWE;
--
1.8.3.1
\
 
 \ /
  Last update: 2017-07-27 14:18    [W:0.034 / U:57.172 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site