lkml.org 
[lkml]   [2017]   [Jul]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/3] media: V3s: Add support for Allwinner CSI.
Hi Yong,

I managed to get the Frame Done interrupt with the previous version of this
driver on the A33 OLinuXino. No data yet (all zeros). I'm still working on it.

One comment below.

On Thu, Jul 27, 2017 at 01:01:35PM +0800, Yong Deng wrote:
> Allwinner V3s SoC have two CSI module. CSI0 is used for MIPI interface
> and CSI1 is used for parallel interface. This is not documented in
> datasheet but by testing and guess.
>
> This patch implement a v4l2 framework driver for it.
>
> Currently, the driver only support the parallel interface. MIPI-CSI2,
> ISP's support are not included in this patch.
>
> Signed-off-by: Yong Deng <yong.deng@magewell.com>
> ---

[...]

> +static int update_buf_addr(struct sun6i_csi *csi, dma_addr_t addr)
> +{
> + struct sun6i_csi_dev *sdev = sun6i_csi_to_dev(csi);
> + /* transform physical address to bus address */
> + dma_addr_t bus_addr = addr - 0x40000000;

What is the source of this magic number? Is it platform dependent? Are there
other devices doing DMA that need this adjustment?

baruch

> +
> + regmap_write(sdev->regmap, CSI_CH_F0_BUFA_REG,
> + (bus_addr + sdev->planar_offset[0]) >> 2);
> + if (sdev->planar_offset[1] != -1)
> + regmap_write(sdev->regmap, CSI_CH_F1_BUFA_REG,
> + (bus_addr + sdev->planar_offset[1]) >> 2);
> + if (sdev->planar_offset[2] != -1)
> + regmap_write(sdev->regmap, CSI_CH_F2_BUFA_REG,
> + (bus_addr + sdev->planar_offset[2]) >> 2);
> +
> + return 0;
> +}

--
http://baruch.siach.name/blog/ ~. .~ Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
- baruch@tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -

\
 
 \ /
  Last update: 2017-07-27 14:17    [W:0.244 / U:6.108 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site