lkml.org 
[lkml]   [2017]   [Jul]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/6] USB3 support for Broadcom NS2 SoC
Date
Changes in v2:
* Addressed Rob Herring's comments on the binding documentation, which
resulted in a restructing of the device tree and how the driver
references those nodes. This, in turn, resulted in a few new
documentation files being created.

This patch set contains the USB3 support for Broadcom NS2 SoC. The USB3
PHY is connected through the MDIO interface.

Jon Mason (3):
dt-bindings: usb: Add documentation for NS2 CDRU USB3
dt-bindings: usb: Add documentation for NS2 ICFG USB3
dt-bindings: usb: Add documentation for NS2 IDM USB3

Yendapally Reddy Dhananjaya Reddy (3):
dt-bindings: phy: Add documentation for NS2 USB3 PHY
phy: Add USB3 PHY support for Broadcom NS2 SoC
arm64: dts: ns2: Add USB3 Support

.../devicetree/bindings/phy/brcm,ns2-usb3-phy.txt | 48 ++
.../bindings/usb/brcm,cdru-usb3-ctrl.txt | 14 +
.../devicetree/bindings/usb/brcm,icfg-usb.txt | 13 +
.../devicetree/bindings/usb/brcm,usb3-idm.txt | 14 +
arch/arm64/boot/dts/broadcom/ns2-svk.dts | 16 +
arch/arm64/boot/dts/broadcom/ns2-xmc.dts | 8 +
arch/arm64/boot/dts/broadcom/ns2.dtsi | 59 +++
drivers/phy/broadcom/Kconfig | 9 +
drivers/phy/broadcom/Makefile | 1 +
drivers/phy/broadcom/phy-bcm-ns2-usb3.c | 580 +++++++++++++++++++++
10 files changed, 762 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/brcm,ns2-usb3-phy.txt
create mode 100644 Documentation/devicetree/bindings/usb/brcm,cdru-usb3-ctrl.txt
create mode 100644 Documentation/devicetree/bindings/usb/brcm,icfg-usb.txt
create mode 100644 Documentation/devicetree/bindings/usb/brcm,usb3-idm.txt
create mode 100644 drivers/phy/broadcom/phy-bcm-ns2-usb3.c

--
2.7.4

\
 
 \ /
  Last update: 2017-07-27 01:05    [W:0.075 / U:4.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site