lkml.org 
[lkml]   [2017]   [Jul]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/1] usb: xhci: Handle USB transaction error on address command
From
Date
Hi,

On 07/26/2017 01:11 PM, Xing, Zhengjun wrote:
>
>
> On 7/25/2017 1:09 PM, Lu Baolu wrote:
>> Xhci driver handles USB transaction errors on transfer events,
>> but transaction errors are possible on address device command
>> completion events as well.
>>
>> The xHCI specification (section 4.6.5) says: A USB Transaction
>> Error Completion Code for an Address Device Command may be due
>> to a Stall response from a device. Software should issue a Disable
>> Slot Command for the Device Slot then an Enable Slot Command to
>> recover from this error.
>>
>> This patch handles USB transaction errors on address command
>> completion events. The related discussion threads can be found
>> through below links.
>>
>> http://marc.info/?l=linux-usb&m=149362010728921&w=2
>> http://marc.info/?l=linux-usb&m=149252752825755&w=2
>>
>> Suggested-by: Mathias Nyman <mathias.nyman@linux.intel.com>
>> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
>> ---
>> drivers/usb/host/xhci.c | 6 ++++++
>> 1 file changed, 6 insertions(+)
>>
>> diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
>> index b2ff1ff..9cc56cd 100644
>> --- a/drivers/usb/host/xhci.c
>> +++ b/drivers/usb/host/xhci.c
>> @@ -3836,6 +3836,12 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev,
>> ret = -EINVAL;
>> break;
>> case COMP_USB_TRANSACTION_ERROR:
>> + xhci_free_virt_device(xhci, udev->slot_id);
>
> In xhci_free_virt_device xhci->devs[slot_id]will be set to NULL.
>
>> + ret = xhci_disable_slot(xhci, command, udev->slot_id);
>
> When xhci_disable_slot check xhci->devs[slot_id] is NULL, just return -EINVAL, the slot will not be disabled.

Yes, really.

I don't think xhci_disable_slot() should return directly when
the virtual device structure is not allocated. This function
is also used to issue a disable slot command when the
virtual device data allocation fails in xhci_alloc_dev().

I will develop v2 patch with a fix for xhci_disable_slot().

Best regards,
Lu Baolu

\
 
 \ /
  Last update: 2017-07-26 07:19    [W:0.049 / U:24.588 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site