lkml.org 
[lkml]   [2017]   [Jul]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH V8 0/3] powernv : Add support for OPAL-OCC command/response interface
Date
In P9, OCC (On-Chip-Controller) supports shared memory based
commad-response interface. Within the shared memory there is an OPAL
command buffer and OCC response buffer that can be used to send
inband commands to OCC. The following commands are supported:

1) Set system powercap
2) Set CPU-GPU power shifting ratio
3) Clear min/max for OCC sensor groups

The skiboot patch for this interface is posted here:
https://lists.ozlabs.org/pipermail/skiboot/2017-July/008352.html

Shilpasri G Bhat (3):
powernv: powercap: Add support for powercap framework
powernv: Add support to set power-shifting-ratio
powernv: Add support to clear sensor groups data

arch/powerpc/include/asm/opal-api.h | 8 +-
arch/powerpc/include/asm/opal.h | 9 +
arch/powerpc/include/uapi/asm/opal-occ.h | 23 +++
arch/powerpc/platforms/powernv/Makefile | 2 +-
arch/powerpc/platforms/powernv/opal-occ.c | 109 ++++++++++++
arch/powerpc/platforms/powernv/opal-powercap.c | 237 +++++++++++++++++++++++++
arch/powerpc/platforms/powernv/opal-psr.c | 169 ++++++++++++++++++
arch/powerpc/platforms/powernv/opal-wrappers.S | 5 +
arch/powerpc/platforms/powernv/opal.c | 10 ++
9 files changed, 570 insertions(+), 2 deletions(-)
create mode 100644 arch/powerpc/include/uapi/asm/opal-occ.h
create mode 100644 arch/powerpc/platforms/powernv/opal-occ.c
create mode 100644 arch/powerpc/platforms/powernv/opal-powercap.c
create mode 100644 arch/powerpc/platforms/powernv/opal-psr.c

--
1.8.3.1

\
 
 \ /
  Last update: 2017-07-26 07:06    [W:0.057 / U:6.604 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site