lkml.org 
[lkml]   [2017]   [Jul]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next v2 04/10] net: dsa: lan9303: Added adjust_link() method
Date
This makes the driver react to device tree "fixed-link" declaration
on CPU port.

- turn off autonegotiation
- force speed 10 or 100 mb/s
- force duplex mode

Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no>
---
drivers/net/dsa/lan9303-core.c | 33 +++++++++++++++++++++++++++++++++
1 file changed, 33 insertions(+)

diff --git a/drivers/net/dsa/lan9303-core.c b/drivers/net/dsa/lan9303-core.c
index 0806a0684d55..be6d78f45a5f 100644
--- a/drivers/net/dsa/lan9303-core.c
+++ b/drivers/net/dsa/lan9303-core.c
@@ -17,6 +17,7 @@
#include <linux/regmap.h>
#include <linux/mutex.h>
#include <linux/mii.h>
+#include <linux/phy.h>

#include "lan9303.h"

@@ -746,6 +747,37 @@ static int lan9303_phy_write(struct dsa_switch *ds, int phy, int regnum,
return chip->ops->phy_write(chip, phy, regnum, val);
}

+static void lan9303_adjust_link(struct dsa_switch *ds, int port,
+ struct phy_device *phydev)
+{
+ struct lan9303 *chip = ds->priv;
+
+ int ctl, res;
+
+ ctl = lan9303_phy_read(ds, port, MII_BMCR);
+
+ if (!phy_is_pseudo_fixed_link(phydev))
+ return;
+
+ ctl &= ~BMCR_ANENABLE;
+ if (phydev->speed == SPEED_100)
+ ctl |= BMCR_SPEED100;
+
+ if (phydev->duplex == DUPLEX_FULL)
+ ctl |= BMCR_FULLDPLX;
+
+ res = lan9303_phy_write(ds, port, MII_BMCR, ctl);
+
+ if (port == chip->phy_addr_sel_strap) {
+ /* Virtual Phy: Remove Turbo 200Mbit mode */
+ lan9303_read(chip->regmap, LAN9303_VIRT_SPECIAL_CTRL, &ctl);
+
+ ctl &= ~(1 << 10); // TURBO BIT
+ res = regmap_write(chip->regmap,
+ LAN9303_VIRT_SPECIAL_CTRL, ctl);
+ }
+}
+
static int lan9303_port_enable(struct dsa_switch *ds, int port,
struct phy_device *phy)
{
@@ -789,6 +821,7 @@ static struct dsa_switch_ops lan9303_switch_ops = {
.get_strings = lan9303_get_strings,
.phy_read = lan9303_phy_read,
.phy_write = lan9303_phy_write,
+ .adjust_link = lan9303_adjust_link,
.get_ethtool_stats = lan9303_get_ethtool_stats,
.get_sset_count = lan9303_get_sset_count,
.port_enable = lan9303_port_enable,
--
2.11.0
\
 
 \ /
  Last update: 2017-07-25 18:43    [W:0.189 / U:5.172 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site