lkml.org 
[lkml]   [2017]   [Jul]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 17/23] camss: vfe: Add interface for scaling
From
Date
Hi Sakari,

Thank you for review.

On 20.07.2017 18:20, Sakari Ailus wrote:
> Hi Todor,
>
> On Mon, Jul 17, 2017 at 01:33:43PM +0300, Todor Tomov wrote:
>> Add compose selection ioctls to handle scaling configuration.
>>
>> Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
>> ---
>> drivers/media/platform/qcom/camss-8x16/camss-vfe.c | 189 ++++++++++++++++++++-
>> drivers/media/platform/qcom/camss-8x16/camss-vfe.h | 1 +
>> 2 files changed, 188 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/media/platform/qcom/camss-8x16/camss-vfe.c b/drivers/media/platform/qcom/camss-8x16/camss-vfe.c
>> index 327f158..8ec6ce7 100644
>> --- a/drivers/media/platform/qcom/camss-8x16/camss-vfe.c
>> +++ b/drivers/media/platform/qcom/camss-8x16/camss-vfe.c
>> @@ -211,6 +211,8 @@
>> #define CAMIF_TIMEOUT_SLEEP_US 1000
>> #define CAMIF_TIMEOUT_ALL_US 1000000
>>
>> +#define SCALER_RATIO_MAX 16
>> +
>> static const u32 vfe_formats[] = {
>> MEDIA_BUS_FMT_UYVY8_2X8,
>> MEDIA_BUS_FMT_VYUY8_2X8,
>> @@ -1905,6 +1907,25 @@ __vfe_get_format(struct vfe_line *line,
>> return &line->fmt[pad];
>> }
>>
>> +/*
>> + * __vfe_get_compose - Get pointer to compose selection structure
>> + * @line: VFE line
>> + * @cfg: V4L2 subdev pad configuration
>> + * @which: TRY or ACTIVE format
>> + *
>> + * Return pointer to TRY or ACTIVE compose rectangle structure
>> + */
>> +static struct v4l2_rect *
>> +__vfe_get_compose(struct vfe_line *line,
>> + struct v4l2_subdev_pad_config *cfg,
>> + enum v4l2_subdev_format_whence which)
>> +{
>> + if (which == V4L2_SUBDEV_FORMAT_TRY)
>> + return v4l2_subdev_get_try_compose(&line->subdev, cfg,
>> + MSM_VFE_PAD_SINK);
>> +
>> + return &line->compose;
>> +}
>>
>> /*
>> * vfe_try_format - Handle try format by pad subdev method
>> @@ -1951,7 +1972,14 @@ static void vfe_try_format(struct vfe_line *line,
>> *fmt = *__vfe_get_format(line, cfg, MSM_VFE_PAD_SINK,
>> which);
>>
>> - if (line->id == VFE_LINE_PIX)
>> + if (line->id == VFE_LINE_PIX) {
>> + struct v4l2_rect *rect;
>> +
>> + rect = __vfe_get_compose(line, cfg, which);
>> +
>> + fmt->width = rect->width;
>> + fmt->height = rect->height;
>> +
>> switch (fmt->code) {
>> case MEDIA_BUS_FMT_YUYV8_2X8:
>> if (code == MEDIA_BUS_FMT_YUYV8_1_5X8)
>> @@ -1979,6 +2007,7 @@ static void vfe_try_format(struct vfe_line *line,
>> fmt->code = MEDIA_BUS_FMT_VYUY8_2X8;
>> break;
>> }
>> + }
>>
>> break;
>> }
>> @@ -1987,6 +2016,50 @@ static void vfe_try_format(struct vfe_line *line,
>> }
>>
>> /*
>> + * vfe_try_compose - Handle try compose selection by pad subdev method
>> + * @line: VFE line
>> + * @cfg: V4L2 subdev pad configuration
>> + * @rect: pointer to v4l2 rect structure
>> + * @which: wanted subdev format
>> + */
>> +static void vfe_try_compose(struct vfe_line *line,
>> + struct v4l2_subdev_pad_config *cfg,
>> + struct v4l2_rect *rect,
>> + enum v4l2_subdev_format_whence which)
>> +{
>> + struct v4l2_mbus_framefmt *fmt;
>> +
>> + rect->width = rect->width - rect->left;
>> + rect->left = 0;
>
> This is the compose rectangle i.e. left and top should be zero (unless it's
> about composing on e.g. a frame buffer). No need to decrement from width;
> similarly for height below.

Yes, it is not composing, but does the user know that? If left and top are
set, it makes sense to keep the rectangle size unchanged I think - actually
decrement width and height (and then clear left and top).

>
>> + rect->height = rect->height - rect->top;
>> + rect->top = 0;
>> +
>> + fmt = __vfe_get_format(line, cfg, MSM_VFE_PAD_SINK, which);
>> +
>> + if (rect->width > fmt->width)
>> + rect->width = fmt->width;
>> +
>> + if (rect->height > fmt->height)
>> + rect->height = fmt->height;
>> +
>> + if (fmt->width > rect->width * SCALER_RATIO_MAX)
>> + rect->width = (fmt->width + SCALER_RATIO_MAX - 1) /
>> + SCALER_RATIO_MAX;
>> +
>> + rect->width &= ~0x1;
>> +
>> + if (fmt->height > rect->height * SCALER_RATIO_MAX)
>> + rect->height = (fmt->height + SCALER_RATIO_MAX - 1) /
>> + SCALER_RATIO_MAX;
>> +
>> + if (rect->width < 16)
>> + rect->width = 16;
>> +
>> + if (rect->height < 4)
>> + rect->height = 4;
>> +}
>> +

<snip>

--
Best regards,
Todor Tomov

\
 
 \ /
  Last update: 2017-07-25 17:37    [W:0.077 / U:2.164 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site