lkml.org 
[lkml]   [2017]   [Jul]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] ARM: OMAP2+: omap_device: drop broken RPM status update from suspend_noirq
* Tony Lindgren <tony@atomide.com> [170725 00:11]:
> * Grygorii Strashko <grygorii.strashko@ti.com> [170724 15:17]:
> > My personal thought here is that removing of pm_runtime_set_active() will not fix
> > root cause of the problem, but rather hide it :( and, probably, real fix will be
> > to update USB framework to ensure that all suspend devices are also PM runtime suspend
> > (not sure how) or add few more pm_suspend_ignore_children() calls
> > (for example as I've tried to do in [2], but this was unfinished).
> >
> > I've found very simple steps to reproduce suspend failure on am335x-evm (should also
> > work on BBB) - do below sequence with USB device plugged:
> >
> > echo platform > /sys/power/pm_test
> > echo 1 > /sys/power/pm_print_times
> > [ echo 0 > /sys/module/printk/parameters/console_suspend ]
> > echo mem > /sys/power/state
> >
> > [ 95.499685] calling 47400000.usb+ @ 733, parent: ocp
> > [ 95.504818] am335x-usb-childs 47400000.usb: runtime PM trying to suspend device but active child
> > [ 95.513750] am335x-usb-childs 47400000.usb: omap device suspend failure 0
> >
> > Below I've attached possible patch which converts OMAP device to
> > use pm_runtime_force_suspend/resume().
>
> It seems to almost work for my PM test cases.. It seems that serial console
> somehow won't get restored after suspend/resume cycle on omap3 though.
>
> The system enters off mode during suspend, and wakes up properly so I can
> ssh to it after resume. But the serial console no longer works after resume.
> This is with 8250-omap driver.

And FYI, on omap4 this produces a bunch of L3 irq errors on suspend.

Tony

\
 
 \ /
  Last update: 2017-07-25 10:57    [W:0.367 / U:0.376 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site