Messages in this thread | | | From | Franklin S Cooper Jr <> | Subject | [PATCH v2 0/4] can: Add new binding to limit bit rate used | Date | Mon, 24 Jul 2017 18:05:17 -0500 |
| |
Add a new generic binding that CAN drivers can use to specify the max arbitration and data bit rate supported by a transceiver. This is useful since in some instances the maximum speeds may be limited by the transceiver used. However, transceivers may not provide a means to determine this limitation at runtime. Therefore, create a new binding that mimics "fixed-link" that allows a user to hardcode the max speeds that can be used.
Also add support for this new binding in the MCAN driver.
Note this is an optional subnode so even if a driver adds support for parsing fixed-transceiver the user does not have to define it in their device tree.
Version 2 changes: Rename function Define proper variable default Drop unit address Move check to changelink function Reword commit message Reword documentation
Franklin S Cooper Jr (4): can: dev: Add support for limiting configured bitrate can: fixed-transceiver: Add documentation for CAN fixed transceiver bindings can: m_can: Update documentation to mention new fixed transceiver binding can: m_can: Add call to of_can_transceiver_fixed
.../bindings/net/can/fixed-transceiver.txt | 42 +++++++++++++++ .../devicetree/bindings/net/can/m_can.txt | 10 ++++ drivers/net/can/dev.c | 59 ++++++++++++++++++++++ drivers/net/can/m_can/m_can.c | 2 + include/linux/can/dev.h | 5 ++ 5 files changed, 118 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/can/fixed-transceiver.txt
-- 2.10.0
| |