lkml.org 
[lkml]   [2017]   [Jul]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V2] pci: quirk: Apply APM ACS quirk to XGene devices
On Mon, 24 Jul 2017 10:33:25 -0700
Feng Kan <fkan@apm.com> wrote:

> On Sun, Jul 23, 2017 at 7:06 PM, Alex Williamson
> <alex.williamson@redhat.com> wrote:
> > On Fri, 21 Jul 2017 13:20:18 -0700
> > Feng Kan <fkan@apm.com> wrote:
> >
> >> On Thu, Jul 20, 2017 at 3:22 PM, Alex Williamson
> >> <alex.williamson@redhat.com> wrote:
> >> > On Wed, 19 Jul 2017 17:46:51 -0700
> >> > Feng Kan <fkan@apm.com> wrote:
> >> >
> >> >> The APM X-Gene PCIe root port does not support ACS at this point.
> >> >> However, the hw provides isolation and source validation through
> >> >> the SMMU. Turn on ACS but disable all the peer to peer features.
> >> >>
> >> >> Signed-off-by: Feng Kan <fkan@apm.com>
> >> >> ---
> >> >> drivers/pci/quirks.c | 15 +++++++++++++++
> >> >> 1 file changed, 15 insertions(+)
> >> >>
> >> >> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
> >> >> index 085fb78..0f8f1cd 100644
> >> >> --- a/drivers/pci/quirks.c
> >> >> +++ b/drivers/pci/quirks.c
> >> >> @@ -4120,6 +4120,19 @@ static int pci_quirk_cavium_acs(struct pci_dev *dev, u16 acs_flags)
> >> >> return acs_flags ? 0 : 1;
> >> >> }
> >> >>
> >> >> +static int pci_quirk_xgene_acs(struct pci_dev *dev, u16 acs_flags)
> >> >> +{
> >> >> + /*
> >> >> + * XGene root matching this quirk do not allow peer-to-peer
> >> >> + * transactions with others, allowing masking out these bits as if they
> >> >> + * were unimplemented in the ACS capability.
> >> >> + */
> >> >> + acs_flags &= ~(PCI_ACS_SV | PCI_ACS_TB | PCI_ACS_RR |
> >> >> + PCI_ACS_CR | PCI_ACS_UF | PCI_ACS_DT);
> >> >> +
> >> >> + return acs_flags ? 0 : 1;
> >> >> +}
> >> >> +
> >> >> /*
> >> >> * Many Intel PCH root ports do provide ACS-like features to disable peer
> >> >> * transactions and validate bus numbers in requests, but do not provide an
> >> >> @@ -4368,6 +4381,8 @@ static int pci_quirk_mf_endpoint_acs(struct pci_dev *dev, u16 acs_flags)
> >> >> { 0x10df, 0x720, pci_quirk_mf_endpoint_acs }, /* Emulex Skyhawk-R */
> >> >> /* Cavium ThunderX */
> >> >> { PCI_VENDOR_ID_CAVIUM, PCI_ANY_ID, pci_quirk_cavium_acs },
> >> >> + /* APM XGene */
> >> >> + { PCI_VENDOR_ID_AMCC, 0xE004, pci_quirk_xgene_acs },
> >> >> { 0 }
> >> >> };
> >> >>
> >> >
> >> > Sorry, I'm not yet convinced there's an equivalent of SV, if a device
> >> > spoofs a different bdf and it reaches the smmu, what prevents that from
> >> > simply referencing the context for that alternate bdf?
> >> Perhaps I am not understanding the question correctly. The bdf forms a
> >> stream id which is used to provide an context. Since there is no actual
> >> context created by an alternate bdf, the transaction would be rejected
> >> by the SMMU.
> >
> > Unless that context does exist. Take for example a basic topology:
> >
> > -[0000:00]-+-00.0
> > +-01.0-[01]----00.0
> > +-02.0-[02]----00.0
> >
> > Assume 00:01.0 and 00:02.0 are root ports and 01:00.0 and 02:00.0 are
> > their respective downstream endpoint. A single iommu would typically
> > handle both of these endpoints using the requester ID, aka stream ID, to
> > reference the appropriate context. Source validation at the root port
> > makes sure that any forwarded transaction has a requester ID that falls
> > between the secondary and subordinate bus number range of the root
> > port. For instance, if device 01:00.0 was able to generate a
> > transaction with a requester ID of 02:00.0, source validation at the
> > root port would generate an ACS violation. If the root port does not
> > support source validation, the transaction might successfully reference
> > the iommu context for the other endpoint. Therefore I don't understand
> > what property of the SMMU is able to prevent this spoofing technique if
> > the root port provides no protection on its own. Thanks,
> Yes, you are right. I left out some details to our implementation. Our
> implementation
> of the stream ID is not just the BDF. The stream ID also contains a
> port ID at the
> upper bits to indicate the difference between the PCIe ports. The scenario you
> explained up above should not happen.

Ok, great. Can we update the comment in the patch to address that SV
is implicit in the generation of a port specific stream ID since it
cannot be hand-waved away as part of p2p? Thanks,

Alex

\
 
 \ /
  Last update: 2017-07-24 20:51    [W:0.053 / U:0.404 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site