lkml.org 
[lkml]   [2017]   [Jul]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 6/8] KVM: arm/arm64: vgic: Implement forwarding setting
On Thu, Jun 15, 2017 at 02:52:38PM +0200, Eric Auger wrote:
> Implements kvm_vgic_[set|unset]_forwarding.
>
> Handle low-level VGIC programming and consistent irqchip
> programming.
>
> Signed-off-by: Eric Auger <eric.auger@redhat.com>
>
> ---
>
> v1 -> v2:
> - change the parameter names used in the declaration
> - use kvm_vgic_map/unmap_phys_irq and handle their returned value
> ---
> include/kvm/arm_vgic.h | 5 +++
> virt/kvm/arm/vgic/vgic.c | 88 ++++++++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 93 insertions(+)
>
> diff --git a/include/kvm/arm_vgic.h b/include/kvm/arm_vgic.h
> index cceb31d..5064a57 100644
> --- a/include/kvm/arm_vgic.h
> +++ b/include/kvm/arm_vgic.h
> @@ -343,4 +343,9 @@ int kvm_send_userspace_msi(struct kvm *kvm, struct kvm_msi *msi);
> */
> int kvm_vgic_setup_default_irq_routing(struct kvm *kvm);
>
> +int kvm_vgic_set_forwarding(struct kvm *kvm, unsigned int host_irq,
> + unsigned int vintid);
> +void kvm_vgic_unset_forwarding(struct kvm *kvm, unsigned int host_irq,
> + unsigned int vintid);
> +
> #endif /* __KVM_ARM_VGIC_H */
> diff --git a/virt/kvm/arm/vgic/vgic.c b/virt/kvm/arm/vgic/vgic.c
> index 2e35ac7..9ee3e77 100644
> --- a/virt/kvm/arm/vgic/vgic.c
> +++ b/virt/kvm/arm/vgic/vgic.c
> @@ -781,3 +781,91 @@ bool kvm_vgic_map_is_active(struct kvm_vcpu *vcpu, unsigned int vintid)
> return map_is_active;
> }
>
> +/**
> + * kvm_vgic_set_forwarding - Set IRQ forwarding
> + *
> + * @kvm: kvm handle
> + * @host_irq: the host linux IRQ
> + * @vintid: the virtual INTID
> + *
> + * This function must be called when the IRQ is not active:
> + * ie. not active at GIC level and not currently under injection
> + * into the guest using the unforwarded mode. The physical IRQ must
> + * be disabled and all vCPUs must have been exited and prevented
> + * from being re-entered.
> + */
> +int kvm_vgic_set_forwarding(struct kvm *kvm, unsigned int host_irq,
> + unsigned int vintid)
> +{
> + struct kvm_vcpu *vcpu;
> + struct vgic_irq *irq;
> + int ret;
> +
> + kvm_debug("%s host_irq=%d vintid=%d\n", __func__, host_irq, vintid);

do you need to check if the vgic is initialized etc. here?

> +
> + if (!vgic_valid_spi(kvm, vintid))
> + return -EINVAL;
> +
> + irq = vgic_get_irq(kvm, NULL, vintid);
> + spin_lock(&irq->irq_lock);
> +
> + if (irq->hw) {
> + ret = -EINVAL;

is this because it's already forwarded? How about EBUSY or EEXIST
instead then?

> + goto unlock;
> + }
> + vcpu = irq->target_vcpu;
> + if (!vcpu) {
> + ret = -EAGAIN;

what is this case exactly?

> + goto unlock;
> + }
> +
> + ret = kvm_vgic_map_irq(vcpu, irq, host_irq);
> + if (!ret)
> + irq_set_vcpu_affinity(host_irq, vcpu);

so this is essentially map + set_vcpu_affinity. Why do we want the GIC
to do this in one go as opposed to leaving it up to the caller?

> +unlock:
> + spin_unlock(&irq->irq_lock);
> + vgic_put_irq(kvm, irq);
> + return ret;
> +}
> +
> +/**
> + * kvm_vgic_unset_forwarding - Unset IRQ forwarding
> + *
> + * @kvm: KVM handle
> + * @host_irq: the host Linux IRQ number
> + * @vintid: virtual INTID
> + *
> + * This function must be called when the host irq is disabled and
> + * all vCPUs have been exited and prevented from being re-entered.
> + */
> +void kvm_vgic_unset_forwarding(struct kvm *kvm,
> + unsigned int host_irq,
> + unsigned int vintid)
> +{
> + struct vgic_irq *irq;
> + bool active;
> +
> + kvm_debug("%s host_irq=%d vintid=%d\n", __func__, host_irq, vintid);

do you need to check if the vgic is initialized etc. here?

> +
> + if (!vgic_valid_spi(kvm, vintid))
> + return;
> +
> + irq = vgic_get_irq(kvm, NULL, vintid);
> + spin_lock(&irq->irq_lock);
> +
> + if (!irq->hw)
> + goto unlock;
> +
> + WARN_ON(irq_get_irqchip_state(host_irq, IRQCHIP_STATE_ACTIVE, &active));
> +
> + if (active)
> + irq_set_irqchip_state(host_irq, IRQCHIP_STATE_ACTIVE, false);
> +
> + kvm_vgic_unmap_irq(irq);
> + irq_set_vcpu_affinity(host_irq, NULL);
> +
> +unlock:
> + spin_unlock(&irq->irq_lock);
> + vgic_put_irq(kvm, irq);
> +}
> +
> --
> 2.5.5
>

Thanks,
-Christoffer

\
 
 \ /
  Last update: 2017-07-21 15:14    [W:0.145 / U:1.312 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site