lkml.org 
[lkml]   [2017]   [Jul]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v2 5/7] input: goldfish: Fix multitouch event handling
Date
Hello, Dmitry,

Thanks for your valuable review - and sorry for my late response.

For this patch, I am just the submitter, and I would ask Lingfang to
make some additional comments/clarifications regarding architecture of
user-kernel protocols for relevant drivers, and also regarding similar
issues that you brought up.

However, please see my notes (from the point of view of user of this
driver) below, perhaps they can clear some doubts regarding this patch.

> ________________________________________
> From: Dmitry Torokhov [dmitry.torokhov@gmail.com]
> Sent: Thursday, June 29, 2017 11:58 AM
> To: Aleksandar Markovic
> Cc: linux-mips@linux-mips.org; Lingfeng Yang; Miodrag Dinic; Goran Ferenc; Aleksandar Markovic; Douglas Leung; Henrik Rydberg; James Hogan; linux-input@vger.kernel.org; linux-kernel@vger.kernel.org; Paul Burton; Petar Jovanovic; Raghu Gandham
> Subject: Re: [PATCH v2 5/7] input: goldfish: Fix multitouch event handling
>
> On Wed, Jun 28, 2017 at 05:56:29PM +0200, Aleksandar Markovic wrote:
> > From: Lingfeng Yang <lfy@google.com>
> >
> > Register Goldfish Events device properly as a multitouch device,
> > and send SYN_REPORT event in appropriate cases only.
> >
> > If SYN_REPORT is sent on every single multitouch event, it breaks
> > the multitouch. The multitouch becomes janky and having to click
> > 2-3 times to do stuff (plus randomly activating notification bars
> > when not clicking).
>
> This sounds like a deficiency in protocol handling in userspace. Given
> that input core can suppress duplicate events userpsace mught very well
> only see one ABS_X followed by SYN_REPORT if Y coordinate did not change
> or was suppressed by jitter detection.
>

I can't comment on protocols - I have to deffer these questions to
Lingfeng,

My experiences during integration of Android emulator for Mips
related to this driver is as follows: Without this patch, UI
interaction (even non-multitouch) is so erratic that I would think
majority of users would deem emulator UI non-usable. So, the problem
is severe. With this patch, however, UI is nice and dendy - and,
more than this, we did accross-the-board UI regression tests of
this path (via CTS), and did not find any regression at all.


> > If these SYN_REPORT events are supressed,
> > multitouch will work fine, plus the events will have a protocol
> > that looks nice.
> >
> > In addition, Goldfish Events device needs to be registerd as a
> > multitouch device by issuing input_mt_init_slots. Otherwise,
> > input_handle_abs_event in drivers/input/input.c will silently drop
> > all ABS_MT_SLOT events, casusing touches with more than one finger
> > not to work properly.
> >
> > Signed-off-by: Lingfeng Yang <lfy@google.com>
> > Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
> > Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
> > Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
> > ---
> > drivers/input/keyboard/goldfish_events.c | 33 +++++++++++++++++++++++++++++++-
> > 1 file changed, 32 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/input/keyboard/goldfish_events.c b/drivers/input/keyboard/goldfish_events.c
> > index f6e643b..6e0b8bb 100644
> > --- a/drivers/input/keyboard/goldfish_events.c
> > +++ b/drivers/input/keyboard/goldfish_events.c
> > @@ -17,6 +17,7 @@
> > #include <linux/interrupt.h>
> > #include <linux/types.h>
> > #include <linux/input.h>
> > +#include <linux/input/mt.h>
> > #include <linux/kernel.h>
> > #include <linux/platform_device.h>
> > #include <linux/slab.h>
> > @@ -24,6 +25,8 @@
> > #include <linux/io.h>
> > #include <linux/acpi.h>
> >
> > +#define GOLDFISH_MAX_FINGERS 5
> > +
> > enum {
> > REG_READ = 0x00,
> > REG_SET_PAGE = 0x00,
> > @@ -52,7 +55,22 @@ static irqreturn_t events_interrupt(int irq, void *dev_id)
> > value = __raw_readl(edev->addr + REG_READ);
> >
> > input_event(edev->input, type, code, value);
> > - input_sync(edev->input);
> > +
> > + /*
> > + * Send an extra (EV_SYN, SYN_REPORT, 0x0) event if a key
> > + * was pressed. Some keyboard device drivers may only send
> > + * the EV_KEY event and not EV_SYN.
>
> Can they be fixed?
>
> > + *
> > + * Note that sending an extra SYN_REPORT is not necessary
> > + * nor correct protocol with other devices such as
> > + * touchscreens, which will send their own SYN_REPORT's
> > + * when sufficient event information has been collected
> > + * (e.g., for touchscreens, when pressure and X/Y coordinates
> > + * have been received). Hence, we will only send this extra
> > + * SYN_REPORT if type == EV_KEY.
> > + */
> > + if (type == EV_KEY)
> > + input_sync(edev->input);
>
> Ideally we would not be sending synthetic EV_SYN at all...
>

My understanding is that this patch aims to minimize synthetic EV_SYNs.
It would've been great if it had eliminated them all, but such
requirement seems to require significant work in multiple drivers.
All that taken into account, this patch looks to me like a good step in
the right direction, and I am asking for its acceptance in its current
form.

> > return IRQ_HANDLED;
> > }
> >
> > @@ -155,6 +173,19 @@ static int events_probe(struct platform_device *pdev)
> > input_dev->name = edev->name;
> > input_dev->id.bustype = BUS_HOST;
> >
> > + /*
> > + * Set the Goldfish Device to be multitouch.
> > + *
> > + * In the Ranchu kernel, there is multitouch-specific code
> > + * for handling ABS_MT_SLOT events (see
> > + * drivers/input/input.c:input_handle_abs_event).
> > + * If we do not issue input_mt_init_slots, the kernel will
> > + * filter out needed ABS_MT_SLOT events when we touch the
> > + * screen in more than one place, preventing multitouch with
> > + * more than one finger from working.
> > + */
> > + input_mt_init_slots(input_dev, GOLDFISH_MAX_FINGERS, 0);
>
> This needs error handling. Also, can the backend communicate number of
> slots so the userspace has better idea about the capabilities of the
> device?
>

Error handling will be fixed. Detecting capabilities sounds like a
good idea, but how about leaving it for a future patch?

> > +
> > events_import_bits(edev, input_dev->evbit, EV_SYN, EV_MAX);
> > events_import_bits(edev, input_dev->keybit, EV_KEY, KEY_MAX);
> > events_import_bits(edev, input_dev->relbit, EV_REL, REL_MAX);
> > --
> > 2.7.4
> >
>
> Thanks.
>
> --
> Dmitry

Also, at the end, I would like to point that this patch have already
been in Android kernel "common 4.4" repository for some longish time,
we picked it from there:

https://android.googlesource.com/kernel/common/+/8bf12bc1b78dac6cb4fb7e4fbc0920978d17f5ea

This means that this patch is tested fairly well by now.

Regards,

Aleksandar

\
 
 \ /
  Last update: 2017-07-21 12:52    [W:0.048 / U:1.372 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site