lkml.org 
[lkml]   [2017]   [Jul]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 5/5] ARM: dts: rockchip: set PWM delay backlight settings for Minnie
Date
The minnie devices comes with an AUO B101EAN01 panel which is different
from default veyron devices, thus the power on/off timing sequence is
slightly different. The datasheet specifies a pwm delay of 200 ms, so
update the PMW delay proprieties accordingly.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---
Heiko,
I'm not able to test this patch in a minnie device because I don't have
one, so could you do a quick try, please?

Changes since v3:
- Use new -ms names for proprieties.
- Fix the delay, should be 200ms instead of 20ms (Pavel)
Changes since v2:
- Use new names for proprieties.
Changes since v1:
- Add this new patch as minnie has differents timings

arch/arm/boot/dts/rk3288-veyron-minnie.dts | 2 ++
1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
index 544de60..4c5307e6 100644
--- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
@@ -123,6 +123,8 @@
240 241 242 243 244 245 246 247
248 249 250 251 252 253 254 255>;
power-supply = <&backlight_regulator>;
+ post-pwm-on-delay-ms = <200>;
+ pwm-off-delay-ms = <200>;
};

&emmc {
--
2.9.3
\
 
 \ /
  Last update: 2017-07-21 12:49    [W:0.127 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site