lkml.org 
[lkml]   [2017]   [Jul]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH 3/4] serial: uartps: Move cnds_uart_get_port to probe
Date
c&p this function to probe as preparation for removing
cdns_uart_port[] static array.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

drivers/tty/serial/xilinx_uartps.c | 61 +++++++++++++-------------------------
1 file changed, 21 insertions(+), 40 deletions(-)

diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index e6470a3111ce..4fb74baeae35 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -1104,43 +1104,6 @@ static void cdns_uart_pm(struct uart_port *port, unsigned int state,

static struct uart_port cdns_uart_port[CDNS_UART_NR_PORTS];

-/**
- * cdns_uart_get_port - Configure the port from platform device resource info
- * @id: Port id
- *
- * Return: a pointer to a uart_port or NULL for failure
- */
-static struct uart_port *cdns_uart_get_port(int id)
-{
- struct uart_port *port;
-
- /* Try the given port id if failed use default method */
- if (cdns_uart_port[id].mapbase != 0) {
- /* Find the next unused port */
- for (id = 0; id < CDNS_UART_NR_PORTS; id++)
- if (cdns_uart_port[id].mapbase == 0)
- break;
- }
-
- if (id >= CDNS_UART_NR_PORTS)
- return NULL;
-
- port = &cdns_uart_port[id];
-
- /* At this point, we've got an empty uart_port struct, initialize it */
- spin_lock_init(&port->lock);
- port->membase = NULL;
- port->irq = 0;
- port->type = PORT_UNKNOWN;
- port->iotype = UPIO_MEM32;
- port->flags = UPF_BOOT_AUTOCONF;
- port->ops = &cdns_uart_ops;
- port->fifosize = CDNS_UART_FIFO_SIZE;
- port->line = id;
- port->dev = NULL;
- return port;
-}
-
#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
/**
* cdns_uart_console_wait_tx - Wait for the TX to be full
@@ -1545,15 +1508,33 @@ static int cdns_uart_probe(struct platform_device *pdev)
if (id < 0)
id = 0;

- /* Initialize the port structure */
- port = cdns_uart_get_port(id);
+ /* Try the given port id if failed use default method */
+ if (cdns_uart_port[id].mapbase != 0) {
+ /* Find the next unused port */
+ for (id = 0; id < CDNS_UART_NR_PORTS; id++)
+ if (cdns_uart_port[id].mapbase == 0)
+ break;
+ }

- if (!port) {
+ port = &cdns_uart_port[id];
+ if (!port || id >= CDNS_UART_NR_PORTS) {
dev_err(&pdev->dev, "Cannot get uart_port structure\n");
rc = -ENODEV;
goto err_out_notif_unreg;
}

+ /* At this point, we've got an empty uart_port struct, initialize it */
+ spin_lock_init(&port->lock);
+ port->membase = NULL;
+ port->irq = 0;
+ port->type = PORT_UNKNOWN;
+ port->iotype = UPIO_MEM32;
+ port->flags = UPF_BOOT_AUTOCONF;
+ port->ops = &cdns_uart_ops;
+ port->fifosize = CDNS_UART_FIFO_SIZE;
+ port->line = id;
+ port->dev = NULL;
+
/*
* Register the port.
* This function also registers this device with the tty layer
--
1.9.1
\
 
 \ /
  Last update: 2017-07-21 11:33    [W:0.205 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site