lkml.org 
[lkml]   [2017]   [Jul]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/3] can: m_can: Update documentation to indicate that hclk may be optional
Date
Update the documentation to reflect that hclk is now an optional clock.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
---
Documentation/devicetree/bindings/net/can/m_can.txt | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/net/can/m_can.txt b/Documentation/devicetree/bindings/net/can/m_can.txt
index 9e33177..2a0fe5b 100644
--- a/Documentation/devicetree/bindings/net/can/m_can.txt
+++ b/Documentation/devicetree/bindings/net/can/m_can.txt
@@ -12,7 +12,8 @@ Required properties:
- interrupt-names : Should contain "int0" and "int1"
- clocks : Clocks used by controller, should be host clock
and CAN clock.
-- clock-names : Should contain "hclk" and "cclk"
+- clock-names : Should contain "hclk" and "cclk". For some socs hclk
+ may be optional.
- pinctrl-<n> : Pinctrl states as described in bindings/pinctrl/pinctrl-bindings.txt
- pinctrl-names : Names corresponding to the numbered pinctrl states
- bosch,mram-cfg : Message RAM configuration data.
--
2.10.0
\
 
 \ /
  Last update: 2017-07-20 01:12    [W:0.048 / U:0.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site