lkml.org 
[lkml]   [2017]   [Jul]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V2 2/9] dt-bindings: usb: bdc: Add Device Tree binding for Broadcom UDC driver
Date
Add Device Tree binding document for Broadcom USB Device
Controller (BDC).

Signed-off-by: Al Cooper <alcooperx@gmail.com>
---
Documentation/devicetree/bindings/usb/brcm,bdc.txt | 29 ++++++++++++++++++++++
1 file changed, 29 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/brcm,bdc.txt

diff --git a/Documentation/devicetree/bindings/usb/brcm,bdc.txt b/Documentation/devicetree/bindings/usb/brcm,bdc.txt
new file mode 100644
index 0000000..63e63af
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/brcm,bdc.txt
@@ -0,0 +1,29 @@
+Broadcom USB Device Controller (BDC)
+====================================
+
+Required properties:
+
+- compatible: must be one of:
+ "brcm,bdc-v0.16"
+ "brcm,bdc"
+- reg: the base register address and length
+- interrupts: the interrupt line for this controller
+
+Optional properties:
+
+On Broadcom STB platforms, these properties are required:
+
+- phys: phandle to one or two USB PHY blocks
+ NOTE: Some SoC's have a single phy and some have
+ USB 2.0 and USB 3.0 phys
+- clocks: phandle to the functional clock of this block
+
+Example:
+
+ bdc@f0b02000 {
+ compatible = "brcm,bdc-v0.16";
+ reg = <0xf0b02000 0xfc4>;
+ interrupts = <0x0 0x60 0x0>;
+ phys = <&usbphy_0 0x0>;
+ clocks = <&sw_usbd>;
+ };
--
1.9.0.138.g2de3478
\
 
 \ /
  Last update: 2017-07-19 21:17    [W:0.092 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site