lkml.org 
[lkml]   [2017]   [Jul]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v1 1/2] remoteproc: dt: Provide bindings for iMX6SX/7D Remote Processor Controller driver
On Tue 18 Jul 01:45 PDT 2017, Oleksij Rempel wrote:

> Hallo Bjorn,
>
> On 11.07.2017 00:14, Bjorn Andersson wrote:
> > On Mon 10 Jul 07:42 PDT 2017, Oleksij Rempel wrote:
> >
> > > Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> > > ---
> > > .../devicetree/bindings/remoteproc/imx-rproc.txt | 44 ++++++++++++++++++++++
> > > 1 file changed, 44 insertions(+)
> > > create mode 100644 Documentation/devicetree/bindings/remoteproc/imx-rproc.txt
> > >
> > > diff --git a/Documentation/devicetree/bindings/remoteproc/imx-rproc.txt b/Documentation/devicetree/bindings/remoteproc/imx-rproc.txt
> > > new file mode 100644
> > > index 000000000000..e7c61993e1b8
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/remoteproc/imx-rproc.txt
> > > @@ -0,0 +1,44 @@
> > > +NXP iMX6SX/iMX7D Co-Processor Bindings
> > > +----------------------------------------
> > > +
> > > +This binding provides support for ARM Cortex M4 Co-processor found on some
> > > +NXP iMX SoCs.
> > > +
> > > +Required properties:
> > > +- compatible Should be one of:
> > > + "fsl,imx7d-rproc"
> > > + "fsl,imx6sx-rproc"
> > > +- clocks Clock for co-processor (See: ../clock/clock-bindings.txt)
> > > +- syscfg Phandle to syscon block which provide access to
> >
> > This is called "syscon" in the code and the example.
>
> done.
>
> > > + System Reset Controller
> > > +
> > > +Optional properties:
> > > +- reg: Should contain the address ranges for some of internal
> > > + memory regions.
> >
> > Something less hand-wavy, like: "Should list the memory regions for the
> > remoteproc"
> >
> > > +- reg-names: Contains the corresponding names for the memory
> > > + regions. These should be named "ddr", "ocram", "ocram-s",
> > > + "ocram-epdc" or "ocram-pxp".
> >
> > Make this comment define which memory regions are required for each of
> > the systems.
>
> done.
>
> > > +Fallowing memory ranges are expected:
> > > +- For "fsl,imx7d-rproc"
> > > + <0x00900000 0x00020000> - "ocram"
> > > + <0x00920000 0x00020000> - "ocram-epdc"
> > > + <0x00940000 0x00008000> - "ocram-pxp"
> > > + <0x80000000 0x0FFF0000> - "ddr" (code area)
> > > + <0x80000000 0x60000000> - "ddr" (data area)
> >
> > There's no reason to list the actual regions in the binding
> > document. Just list the requires regions for each system.
> >
> > > +- For "fsl,imx6sx-rproc"
> > > + <0x008F8000 0x00004000> - "ocram-s"
> > > + <0x80000000 0x0FFF8000> - "ddr" (code area)
> > > + <0x80000000 0x60000000> - "ddr" (data area)
> > > +
> > > +Note: the "ddr" code and data ranges are overlapping. Code area is smaller
> > > +than data area. So this range should be carefully chosen according to your
> > > +system and application requirements.
> > > +
> >
> > This is a source of future issues as this indicates that I should have
> > reg-names list "ddr" twice.
>
> Then I will name it:
> "ddri" (incstruction/code area),
> "ddrd" (data area)
>
> unless there are other suggestions.
>

But are you saying that it's correct that these two memory regions
should overlap?

> > Also, as you warn about the user needing to pick the values for "ddr",
> > does that mean that it's a carveout of System RAM?
>
> Yes, it is a part of System RAM.
>

Then there will be an associated reserved-memory region for the
region(s), you should add a label to this and use "memory-region" to get
hold of the addresses instead.

Regards,
Bjorn

\
 
 \ /
  Last update: 2017-07-18 18:38    [W:0.061 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site