lkml.org 
[lkml]   [2017]   [Jul]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/2] dt-bindings: net: Add bindings for National Instruments XGE netdev
Hi Andrew,

On Sat, Jul 15, 2017 at 08:37:45PM +0200, Andrew Lunn wrote:
> On Fri, Jul 14, 2017 at 01:48:45PM -0700, Moritz Fischer wrote:
> > This adds bindings for the NI XGE 1G/10G network device.
> >
> > Signed-off-by: Moritz Fischer <mdf@kernel.org>
> > ---
> > Documentation/devicetree/bindings/net/nixge.txt | 32 +++++++++++++++++++++++++
> > 1 file changed, 32 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/net/nixge.txt
> >
> > diff --git a/Documentation/devicetree/bindings/net/nixge.txt b/Documentation/devicetree/bindings/net/nixge.txt
> > new file mode 100644
> > index 0000000..9fff5a7
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/net/nixge.txt
> > @@ -0,0 +1,32 @@
> > +* NI XGE Ethernet controller
> > +
> > +Required properties:
> > +- compatible: Should be "ni,xge-enet-2.00"
> > +- reg: Address and length of the register set for the device
> > +- interrupts: Should contain tx and rx interrupt
> > +- interrupt-names: Should be "rx-irq" and "tx-irq"
> > +- phy-mode: See ethernet.txt file in the same directory.
>
> Hi Moritz
>
> phy-handle is now required.

Good catch, thanks.
>
> > +Examples (10G generic PHY):
> > + nixge0: ethernet@40000000 {
> > + compatible = "ni,xge-enet-2.00";
> > + reg = <0x40000000 0x6000>;
> > +
> > + nvmem-cells = <&eth1_addr>;
> > + nvmem-cell-names = "address";
> > +
> > + interrupts = <0 29 4>, <0 30 4>;
>
> IRQ_TYPE_LEVEL_HIGH

Sure, will do.
>
> > + interrupt-names = "rx-irq", "tx-irq";
> > + interrupt-parent = <&intc>;
> > +
> > + phy-mode = "xgmii";
> > + phy-handle = <&ethernet_phy1>;
> > +
> > + ethernet_phy1: ethernet-phy@4 {
> > + compatible = "ethernet-phy-ieee802.3-c45";
> > + reg = <4>;
> > + devices = <0xa>;
> > + };
>
> Since you don't fully implement c45, does this example actually work?

Yeah, I've tested this continuously. But for v3 I anyways implmented c45
writes.

> And devices is not a standard phy property.
>

Will fix.
> Andrew

Cheers,

Moritz

\
 
 \ /
  Last update: 2017-07-15 20:47    [W:0.090 / U:23.732 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site