lkml.org 
[lkml]   [2017]   [Jul]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v7 08/13] x86/ioapic: Refactor the delay logic in timer_irq_works()
Date
Kernel use timer_irq_works() to detects the timer IRQs. It calls
mdelay(10) to delay ten ticks and check whether the timer IRQ work
or not. The mdelay() depends on the loops_per_jiffy which is set up
in calibrate_delay(). Current kernel defaults the IRQ 0 is available
when it calibrates delay.

But it is wrong in the dump-capture kernel with 'notsc' option inherited
from 1st kernel option. dump-capture kernel can't make sure the timer IRQ
works well.

The correct design is making the interrupt mode setup and checking timer
IRQ works in advance of calibrate_delay(). That results in the mdelay()
being unusable in timer_irq_works().

Preparatory patch to make the setup in advance. Refactor the delay logic
by waiting for some cycles. In the system with X86_FEATURE_TSC feature,
Use rdtsc(), others will call __delay() directly.

Note: regard 4G as the max CPU frequence of current single CPU.

Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
---
arch/x86/kernel/apic/io_apic.c | 45 ++++++++++++++++++++++++++++++++++++++++--
1 file changed, 43 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index b4f5f73..a87a4ba 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -1585,6 +1585,43 @@ static int __init notimercheck(char *s)
}
__setup("no_timer_check", notimercheck);

+static void __init delay_with_tsc(void)
+{
+ unsigned long long start, now;
+ unsigned long end = jiffies + 4;
+
+ start = rdtsc();
+
+ /*
+ * We don't know the TSC frequency yet, but waiting for
+ * 40000000000/HZ TSC cycles is safe:
+ * 4 GHz == 10 jiffies
+ * 1 GHz == 40 jiffies
+ */
+ do {
+ rep_nop();
+ now = rdtsc();
+ } while ((now - start) < 40000000000UL / HZ &&
+ time_before_eq(jiffies, end));
+}
+
+static void __init delay_without_tsc(void)
+{
+ unsigned long end = jiffies + 4;
+ int band = 1;
+
+ /*
+ * We don't know any frequency yet, but waiting for
+ * 40940000000/HZ cycles is safe:
+ * 4 GHz == 10 jiffies
+ * 1 GHz == 40 jiffies
+ * 1 << 1 + 1 << 2 +...+ 1 << 11 = 4094
+ */
+ do {
+ __delay(((1U << band++) * 10000000UL) / HZ);
+ } while (band < 12 && time_before_eq(jiffies, end));
+}
+
/*
* There is a nasty bug in some older SMP boards, their mptable lies
* about the timer IRQ. We do the following to work around the situation:
@@ -1603,8 +1640,12 @@ static int __init timer_irq_works(void)

local_save_flags(flags);
local_irq_enable();
- /* Let ten ticks pass... */
- mdelay((10 * 1000) / HZ);
+
+ if (boot_cpu_has(X86_FEATURE_TSC))
+ delay_with_tsc();
+ else
+ delay_without_tsc();
+
local_irq_restore(flags);

/*
--
2.5.5


\
 
 \ /
  Last update: 2017-07-14 07:55    [W:0.153 / U:0.532 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site