lkml.org 
[lkml]   [2017]   [Jul]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH net] xgene: Don't fail probe, if there is no clk resource for SGMII interfaces
From: Thomas Bogendoerfer <tbogendoerfer@suse.de>

This change fixes following problem

[ 1.827940] xgene-enet: probe of 1f210030.ethernet failed with error -2

which leads to a missing ethernet interface (reproducable at least on
Gigabyte MP30-AR0 and APM Mustang systems).

The check for a valid clk resource fails, because DT doesn't provide a
clock for sgenet1. But the driver doesn't use this clk, if the ethernet
port is connected via SGMII. Therefore this patch avoids probing for clk
on SGMII interfaces.

Fixes: 9aea7779b764 drivers: net: xgene: Fix crash on DT systems
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
---
drivers/net/ethernet/apm/xgene/xgene_enet_main.c | 22 ++++++++++++----------
1 file changed, 12 insertions(+), 10 deletions(-)

diff --git a/drivers/net/ethernet/apm/xgene/xgene_enet_main.c b/drivers/net/ethernet/apm/xgene/xgene_enet_main.c
index d3906f6b01bd..86058a9f3417 100644
--- a/drivers/net/ethernet/apm/xgene/xgene_enet_main.c
+++ b/drivers/net/ethernet/apm/xgene/xgene_enet_main.c
@@ -1785,16 +1785,18 @@ static int xgene_enet_get_resources(struct xgene_enet_pdata *pdata)

xgene_enet_gpiod_get(pdata);

- pdata->clk = devm_clk_get(&pdev->dev, NULL);
- if (IS_ERR(pdata->clk)) {
- /* Abort if the clock is defined but couldn't be retrived.
- * Always abort if the clock is missing on DT system as
- * the driver can't cope with this case.
- */
- if (PTR_ERR(pdata->clk) != -ENOENT || dev->of_node)
- return PTR_ERR(pdata->clk);
- /* Firmware may have set up the clock already. */
- dev_info(dev, "clocks have been setup already\n");
+ if (pdata->phy_mode != PHY_INTERFACE_MODE_SGMII) {
+ pdata->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(pdata->clk)) {
+ /* Abort if the clock is defined but couldn't be
+ * retrived. Always abort if the clock is missing on
+ * DT system as the driver can't cope with this case.
+ */
+ if (PTR_ERR(pdata->clk) != -ENOENT || dev->of_node)
+ return PTR_ERR(pdata->clk);
+ /* Firmware may have set up the clock already. */
+ dev_info(dev, "clocks have been setup already\n");
+ }
}

if (pdata->phy_mode != PHY_INTERFACE_MODE_XGMII)
--
2.12.3
\
 
 \ /
  Last update: 2017-07-13 11:23    [W:0.139 / U:0.812 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site