lkml.org 
[lkml]   [2017]   [Jul]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/3] of: overlay: add overlay unittest data for node names and symbols
Date
From: Frank Rowand <frank.rowand@sony.com>

Add nodes and properties to overlay_base and overlay dts files to
test for
- incorrect existing node name detection when overlay node name
has a unit-address
- adding overlay __symbols__ properties to live tree when an
overlay is added to the live tree

Expected result from patch 2/3 is overlay will update the nodes and
properties for /testcase-data-2/fairway-1/ride@100/

Before patch 2/3 is applied:

Console error message near end of unittest:
OF: Duplicate name in fairway-1, renamed to "ride@100#1"

$ cd /proc/device-tree/testcase-data-2/fairway-1/
$ # extra node: ride@100#1
$ ls
#address-cells linux,phandle phandle ride@200
#size-cells name ride@100 status
compatible orientation ride@100#1
$ cd /proc/device-tree/testcase-data-2/fairway-1/ride@100/
$ ls track@3/incline_up
ls: track@3/incline_up: No such file or directory
$ ls track@4/incline_up
ls: track@4/incline_up: No such file or directory

After patch 2/3 is applied:

Console error message no longer occurs

$ cd /proc/device-tree/testcase-data-2/fairway-1/
$ # no extra node: ride@100#1
$ ls
#address-cells compatible name phandle ride@200
#size-cells linux,phandle orientation ride@100 status
$ cd /proc/device-tree/testcase-data-2/fairway-1/ride@100/
$ ls track@3/incline_up
track@3/incline_up
$ ls track@4/incline_up
track@4/incline_up

Expected result from patch 3/3 is new __symbols__ entries for labels
from the overlay _after_ the add overlay symbols patch is also applied.

Before patch 3/3 is applied:

Console error message near end of unittest:
### dt-test ### FAIL of_unittest_overlay_high_level():2296 Adding overlay 'overlay_bad_symbol' failed
### dt-test ### end of unittest - 190 passed, 1 failed

The new unittest "fails" because the expected result of loading the
new overlay is an error instead of success.

$ # node hvac-medium-2 exists because the overlay loaded
$ # since the duplicate symbol was not detected
$ cd /proc/device-tree/testcase-data-2/substation@100/
$ ls
compatible hvac-medium-2 motor-8 reg
hvac-large-1 linux,phandle name status
hvac-medium-1 motor-1 phandle

$ cd /proc/device-tree/__symbols__/
$ ls
electric_1 lights_1 name rides_1 spin_ctrl_2
hvac_1 lights_2 retail_1 spin_ctrl_1

After patch 3/3 is applied:

Previous console error message no longer occurs, but expected error
occurs:
OF: overlay: Failed to apply prop @/__symbols__/hvac_1
OF: overlay: apply failed '/__symbols__'
### dt-test ### end of unittest - 191 passed, 0 failed

$ # node hvac-medium-2 does not exist because the overlay
$ # properly failed to load due to the duplicate symbol
$ cd /proc/device-tree/testcase-data-2/substation@100/
$ ls
compatible hvac-medium-1 motor-1 name reg
hvac-large-1 linux,phandle motor-8 phandle status

$ cd /proc/device-tree/__symbols__/
$ ls
electric_1 lights_1 retail_1 ride_200_right spin_ctrl_2
hvac_1 lights_2 ride_200 rides_1
hvac_2 name ride_200_left spin_ctrl_1
$ cat ride_200; echo
/testcase-data-2/fairway-1/ride@200
$ cat ride_200_left ; echo
/testcase-data-2/fairway-1/ride@200/track@1
$ cat ride_200_right ; echo
/testcase-data-2/fairway-1/ride@200/track@2

Signed-off-by: Frank Rowand <frank.rowand@sony.com>
---
drivers/of/unittest-data/Makefile | 3 +++
drivers/of/unittest-data/overlay.dts | 19 ++++++++++++++++++-
drivers/of/unittest-data/overlay_bad_symbol.dts | 22 ++++++++++++++++++++++
drivers/of/unittest-data/overlay_base.dts | 7 +++++++
drivers/of/unittest.c | 6 ++++++
5 files changed, 56 insertions(+), 1 deletion(-)
create mode 100644 drivers/of/unittest-data/overlay_bad_symbol.dts

diff --git a/drivers/of/unittest-data/Makefile b/drivers/of/unittest-data/Makefile
index 6e00a9c69e58..dae2fe23cd2e 100644
--- a/drivers/of/unittest-data/Makefile
+++ b/drivers/of/unittest-data/Makefile
@@ -1,11 +1,13 @@
obj-y += testcases.dtb.o
obj-y += overlay.dtb.o
obj-y += overlay_bad_phandle.dtb.o
+obj-y += overlay_bad_symbol.dtb.o
obj-y += overlay_base.dtb.o

targets += testcases.dtb testcases.dtb.S
targets += overlay.dtb overlay.dtb.S
targets += overlay_bad_phandle.dtb overlay_bad_phandle.dtb.S
+targets += overlay_bad_symbol.dtb overlay_bad_symbol.dtb.S
targets += overlay_base.dtb overlay_base.dtb.S

.PRECIOUS: \
@@ -15,4 +17,5 @@ targets += overlay_base.dtb overlay_base.dtb.S
# enable creation of __symbols__ node
DTC_FLAGS_overlay := -@
DTC_FLAGS_overlay_bad_phandle := -@
+DTC_FLAGS_overlay_bad_symbol := -@
DTC_FLAGS_overlay_base := -@
diff --git a/drivers/of/unittest-data/overlay.dts b/drivers/of/unittest-data/overlay.dts
index 6cd7e6a0c13e..81140adbe770 100644
--- a/drivers/of/unittest-data/overlay.dts
+++ b/drivers/of/unittest-data/overlay.dts
@@ -25,7 +25,18 @@
#size-cells = <1>;
status = "ok";

- ride@200 {
+ ride@100 {
+
+ track@3 {
+ incline_up = < 48 32 16 >;
+ };
+
+ track@4 {
+ incline_up = < 47 31 15 >;
+ };
+ };
+
+ ride_200: ride@200 {
compatible = "ot,ferris-wheel";
reg = < 0x00000200 0x100 >;
hvac-provider = < &hvac_2 >;
@@ -36,6 +47,12 @@
spin-rph = < 30 >;
gondolas = < 16 >;
gondola-capacity = < 6 >;
+
+ ride_200_left: track@1 {
+ };
+
+ ride_200_right: track@2 {
+ };
};
};
};
diff --git a/drivers/of/unittest-data/overlay_bad_symbol.dts b/drivers/of/unittest-data/overlay_bad_symbol.dts
new file mode 100644
index 000000000000..09261cb9a67e
--- /dev/null
+++ b/drivers/of/unittest-data/overlay_bad_symbol.dts
@@ -0,0 +1,22 @@
+/dts-v1/;
+/plugin/;
+
+/ {
+
+ fragment@0 {
+ target = <&electric_1>;
+
+ __overlay__ {
+
+ // This label should cause an error when the overlay
+ // is applied. There is already a symbol hvac_1
+ // in the base tree
+ hvac_1: hvac-medium-2 {
+ compatible = "ot,hvac-medium";
+ heat-range = < 50 75 >;
+ cool-range = < 60 80 >;
+ };
+
+ };
+ };
+};
diff --git a/drivers/of/unittest-data/overlay_base.dts b/drivers/of/unittest-data/overlay_base.dts
index 5566b27fb61a..997d807259e6 100644
--- a/drivers/of/unittest-data/overlay_base.dts
+++ b/drivers/of/unittest-data/overlay_base.dts
@@ -53,6 +53,13 @@
spin-controller = < &spin_ctrl_2 5 &spin_ctrl_2 7 >;
spin-controller-names = "track_1", "track_2";
queues = < 2 >;
+
+ track@3 {
+ };
+
+ track@4 {
+ };
+
};
};

diff --git a/drivers/of/unittest.c b/drivers/of/unittest.c
index 0107fc680335..e56b8eb220d9 100644
--- a/drivers/of/unittest.c
+++ b/drivers/of/unittest.c
@@ -2010,6 +2010,7 @@ struct overlay_info {
OVERLAY_INFO_EXTERN(overlay_base);
OVERLAY_INFO_EXTERN(overlay);
OVERLAY_INFO_EXTERN(overlay_bad_phandle);
+OVERLAY_INFO_EXTERN(overlay_bad_symbol);

#ifdef CONFIG_OF_OVERLAY

@@ -2018,6 +2019,7 @@ struct overlay_info {
OVERLAY_INFO(overlay_base, -9999),
OVERLAY_INFO(overlay, 0),
OVERLAY_INFO(overlay_bad_phandle, -EINVAL),
+ OVERLAY_INFO(overlay_bad_symbol, -EINVAL),
{}
};

@@ -2289,6 +2291,10 @@ static __init void of_unittest_overlay_high_level(void)

unittest(overlay_data_add(2),
"Adding overlay 'overlay_bad_phandle' failed\n");
+
+ unittest(overlay_data_add(3),
+ "Adding overlay 'overlay_bad_symbol' failed\n");
+
return;

err_unlock:
--
Frank Rowand <frank.rowand@sony.com>
\
 
 \ /
  Last update: 2017-07-10 21:07    [W:0.081 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site