lkml.org 
[lkml]   [2017]   [Jun]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v4 4/7] ARM: dts: meson: use meson6 UART compatible like other nodes
    Date
    The UART bindings needs specifying a SoC family, use the meson6 family
    for the UART nodes like the other nodes.

    Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
    ---
    arch/arm/boot/dts/meson.dtsi | 8 ++++----
    1 file changed, 4 insertions(+), 4 deletions(-)

    diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi
    index 8d9c369..ecc9330 100644
    --- a/arch/arm/boot/dts/meson.dtsi
    +++ b/arch/arm/boot/dts/meson.dtsi
    @@ -79,14 +79,14 @@
    ranges = <0x0 0xc1100000 0x200000>;

    uart_A: serial@84c0 {
    - compatible = "amlogic,meson-uart";
    + compatible = "amlogic,meson6-uart";
    reg = <0x84c0 0x18>;
    interrupts = <0 26 1>;
    status = "disabled";
    };

    uart_B: serial@84dc {
    - compatible = "amlogic,meson-uart";
    + compatible = "amlogic,meson6-uart";
    reg = <0x84dc 0x18>;
    interrupts = <0 75 1>;
    status = "disabled";
    @@ -102,7 +102,7 @@
    };

    uart_C: serial@8700 {
    - compatible = "amlogic,meson-uart";
    + compatible = "amlogic,meson6-uart";
    reg = <0x8700 0x18>;
    interrupts = <0 93 1>;
    status = "disabled";
    @@ -153,7 +153,7 @@
    };

    uart_AO: serial@4c0 {
    - compatible = "amlogic,meson-uart";
    + compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart";
    reg = <0x4c0 0x18>;
    interrupts = <0 90 1>;
    status = "disabled";
    --
    1.9.1
    \
     
     \ /
      Last update: 2017-06-12 01:45    [W:2.540 / U:0.208 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site