lkml.org 
[lkml]   [2017]   [Jun]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 09/25] rtc: m41t80: Switch to use %pt
Date
Use %pt instead of open coded variant to print content of
struct rtc_time in human readable format.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/rtc/rtc-m41t80.c | 6 +-----
1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/drivers/rtc/rtc-m41t80.c b/drivers/rtc/rtc-m41t80.c
index 8940e9e43ea0..155d23a874ff 100644
--- a/drivers/rtc/rtc-m41t80.c
+++ b/drivers/rtc/rtc-m41t80.c
@@ -978,11 +978,7 @@ static int m41t80_probe(struct i2c_client *client,
if (m41t80_data->features & M41T80_FEATURE_HT) {
m41t80_get_datetime(client, &tm);
dev_info(&client->dev, "HT bit was set!\n");
- dev_info(&client->dev,
- "Power Down at %04i-%02i-%02i %02i:%02i:%02i\n",
- tm.tm_year + 1900,
- tm.tm_mon + 1, tm.tm_mday, tm.tm_hour,
- tm.tm_min, tm.tm_sec);
+ dev_info(&client->dev, "Power Down at %pt\n", &tm);
}
rc = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_HOUR,
rc & ~M41T80_ALHOUR_HT);
--
2.11.0
\
 
 \ /
  Last update: 2017-06-12 01:29    [W:0.361 / U:3.360 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site