lkml.org 
[lkml]   [2017]   [Jun]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 46/58] clocksource/drivers: Add a new driver for the Atmel ARM TC blocks
On 06/06/2017 at 17:21:05 +0200, Daniel Lezcano wrote:
> On Tue, May 30, 2017 at 11:51:27PM +0200, Alexandre Belloni wrote:
> > Add a driver for the Atmel Timer Counter Blocks. This driver provides a
> > clocksource and a clockevent device. The clockevent device is linked to the
> > clocksource counter and so it will run at the same frequency.
>
> Where is the clockevent in this driver?
>

That's a leftover from v1, it seems I forgot to rework that commit
message.

> It seems the cutting out of this driver is a bit fuzzy and hard to follow.
>
> Please re-org the changes in a logical manner when resubmitting.
>

I can submit the whole driver as a single patch if that is easier for
you to review.

> > This driver uses regmap and syscon to be able to probe early in the boot
> > and avoid having to switch on the TCB clocksource later. Using regmap also
> > means that unused TCB channels may be used by other drivers (PWM for
> > example).
>
> Can you give more details, I fail to understand how regmap and syscon help to
> probe sooner than timer_init()?
>

Because before that, the tcb driver relied on atmel_tclib to share the
TCBs and it happened way too late, at arch_initcall() time.


> > Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
> > Cc: Thomas Gleixner <tglx@linutronix.de>
> > Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> > ---
> > drivers/clocksource/Kconfig | 13 ++
> > drivers/clocksource/Makefile | 3 +-
> > drivers/clocksource/timer-atmel-tcbclksrc.c | 252 ++++++++++++++++++++++++++++
>
> As it is a clksrc + clkevt, please change the name to something more adequate:
>
> eg. timer-tcb.c
>
> > 3 files changed, 267 insertions(+), 1 deletion(-)
> > create mode 100644 drivers/clocksource/timer-atmel-tcbclksrc.c
> >
> > diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
> > index 545d541ae20e..cbd710db3c09 100644
> > --- a/drivers/clocksource/Kconfig
> > +++ b/drivers/clocksource/Kconfig
> > @@ -418,6 +418,19 @@ config ATMEL_ST
> > help
> > Support for the Atmel ST timer.
> >
> > +config ATMEL_ARM_TCB_CLKSRC
> > + bool "TC Block Clocksource"
> > + select REGMAP_MMIO
> > + depends on GENERIC_CLOCKEVENTS
> > + depends on SOC_AT91RM9200 || SOC_AT91SAM9 || SOC_SAMA5 || COMPILE_TEST
> > + default SOC_AT91RM9200 || SOC_AT91SAM9 || SOC_SAMA5
> > + help
> > + Select this to get a high precision clocksource based on a
> > + TC block with a 5+ MHz base clock rate.
> > + On platforms with 16-bit counters, two timer channels are combined
> > + to make a single 32-bit timer.
> > + It can also be used as a clock event device supporting oneshot mode.
> > +
> > config CLKSRC_METAG_GENERIC
> > def_bool y if METAG
> > help
> > diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
> > index 2b5b56a6f00f..53a0b40e0db2 100644
> > --- a/drivers/clocksource/Makefile
> > +++ b/drivers/clocksource/Makefile
> > @@ -2,7 +2,8 @@ obj-$(CONFIG_CLKSRC_PROBE) += clksrc-probe.o
> > obj-$(CONFIG_CLKEVT_PROBE) += clkevt-probe.o
> > obj-$(CONFIG_ATMEL_PIT) += timer-atmel-pit.o
> > obj-$(CONFIG_ATMEL_ST) += timer-atmel-st.o
> > -obj-$(CONFIG_ATMEL_TCB_CLKSRC) += tcb_clksrc.o
> > +obj-$(CONFIG_ATMEL_TCB_CLKSRC) += tcb_clksrc.o
> > +obj-$(CONFIG_ATMEL_ARM_TCB_CLKSRC) += timer-atmel-tcbclksrc.o
> > obj-$(CONFIG_X86_PM_TIMER) += acpi_pm.o
> > obj-$(CONFIG_SCx200HR_TIMER) += scx200_hrt.o
> > obj-$(CONFIG_CS5535_CLOCK_EVENT_SRC) += cs5535-clockevt.o
> > diff --git a/drivers/clocksource/timer-atmel-tcbclksrc.c b/drivers/clocksource/timer-atmel-tcbclksrc.c
> > new file mode 100644
> > index 000000000000..f18d177bfdea
> > --- /dev/null
> > +++ b/drivers/clocksource/timer-atmel-tcbclksrc.c
> > @@ -0,0 +1,252 @@
> > +#include <linux/clk.h>
> > +#include <linux/clockchips.h>
> > +#include <linux/clocksource.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/kernel.h>
> > +#include <linux/mfd/syscon.h>
> > +#include <linux/of_irq.h>
> > +#include <linux/regmap.h>
> > +#include <linux/sched_clock.h>
> > +#include <soc/at91/atmel_tcb.h>
> > +
> > +static struct atmel_tcb_clksrc {
> > + char name[20];
>
> ^^^^^^^^^^^^^^
> This field is pointless.
>

You mean you don't like how it is used? Or you don't think having the
timer full name is useful?

> > + struct clocksource clksrc;
>
> Why is this field defined and passed around to functions which do not use it?
>
> Please consider using clocksource_mmio_init() and remove this field.
>

Well, this doesn't work with a regmap so it doesn't fit.

> > + struct regmap *regmap;
> > + struct clk *clk[2];
>
> Can you explain why we have two clocks here?
>

Each channel have its clock, I can add a comment if you want.

> > + int channels[2];
>
> Instead of dealing with 2 channels and a costly bits shifting in the hot path,
> why not use a single channel with a different wrap up? IOW mask is 16 or 32.
>
> The resulting code will be simpler, nicer and perhaps more efficient if you
> save the tc_get_cycles() loop?
>

I think the rationale behind it is that 16 bits at 5MHz makes it
wrap every 13ms which is too fast to be useful.

> > + int bits;
>
> ^^^^^^^^
>
> This field is pointless.
>
> > + int irq;
>
> irq belongs to clockevents changes.
>
> > + bool registered;
>
> What is the purpose of this registered boolean?
>

The main reason is that RobH doesn't want to have the use (clocksource
or clockevent) of the timer in the DT so when probing a timer, I need to
know whether I already have a clocksource to decide when it is time to
register a clockevent.

--
Alexandre Belloni, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

\
 
 \ /
  Last update: 2017-06-12 00:52    [W:0.180 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site