lkml.org 
[lkml]   [2017]   [Jun]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 0/7] dra7: Fixes for MMC devicetree node
From
Date
Hi,

On Friday 02 June 2017 04:20 PM, Ulf Hansson wrote:
> On 1 June 2017 at 16:33, Kishon Vijay Abraham I <kishon@ti.com> wrote:
>> There are the set of fixes that were sent initially as part
>> of [1].
>>
>> These are mostly fixes w.r.t populating regulators in
>> mmc dt node. It was working before because the regulators
>> connecting to the IO lines are always on regulators. This will
>> break once we add UHS support where voltage has to be changed
>> dynamically.
>>
>> Performed enumeration testing on dra72-evm-revc, dra72-evm,
>> dra7-evm, am572x-evm, am571x-idk and am572x-idk.
>>
>> This is a preparation series for adding UHS mode support in
>> the above mentioned platforms.
>>
>> [1] -> https://lkml.org/lkml/2017/5/19/196
>>
>> Kishon Vijay Abraham I (5):
>> ARM: dts: dra72-evm-common: Correct vmmc-supply for mmc2
>> ARM: dts: dra72-evm: Add vmmc_aux supply to mmc1
>> ARM: dts: dra72-evm-revc: Add vmmc_aux supply to mmc1
>> ARM: dts: am57xx-beagle-x15-revb1: Fix supply name used for MMC1 IO
>> lines
>> ARM: dts: dra7: Add "max-frequency" property to MMC dt nodes
>>
>> Ravikumar Kattekola (1):
>> ARM: dts: dra7-evm: Correct the vmmc-supply for mmc2
>>
>> Sekhar Nori (1):
>> ARM: OMAP2+: Add pdata-quirks for MMC/SD on DRA74x EVM
>>
>> arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts | 2 +-
>> arch/arm/boot/dts/dra7-evm.dts | 10 ++++++++-
>> arch/arm/boot/dts/dra7.dtsi | 5 +++++
>> arch/arm/boot/dts/dra71-evm.dts | 14 ++++++++++++
>> arch/arm/boot/dts/dra72-evm-common.dtsi | 2 --
>> arch/arm/boot/dts/dra72-evm-revc.dts | 18 ++++++++++++++++
>> arch/arm/boot/dts/dra72-evm.dts | 18 ++++++++++++++++
>> arch/arm/mach-omap2/pdata-quirks.c | 31 +++++++++++++++++++++++++++
>> include/linux/platform_data/hsmmc-omap.h | 3 +++
>> 9 files changed, 99 insertions(+), 4 deletions(-)
>
> This series add a bunch of new vmmc_aux regulators for the mmc
> controller nodes. I would rather see that omap_hsmmc also converts to
> use the generic mmc binding for this regulator, which is "vqmmc".
>
> To accomplish that, omap_hsmmc needs to convert to use
> mmc_regulator_get_supply(). If the "vqmmc" regulator isn't found, it
> should fallback to try the "vmmc_aux".
>
> Can you do that?

sure, I'll prepare that change.

Thanks
Kishon

\
 
 \ /
  Last update: 2017-06-12 00:38    [W:0.441 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site