lkml.org 
[lkml]   [2017]   [Jun]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] Documentation: seq_file: Convert seq_file to rst format
On Mon, 5 Jun 2017 23:58:30 +0530
sayli karnik <karniksayli1995@gmail.com> wrote:

> Add seq_file.rst to a filesystems subsection in the docs tree.

Thanks for doing this. There are a few things we'll have to get fixed
before we can consider merging this one, though.

For filesystem-related stuff, it would be good to CC Al Viro, even if
(checking) get_maintainer.pl doesn't say to do that.

> Signed-off-by: sayli karnik <karniksayli1995@gmail.com>
> ---
> Documentation/core-api/filesystems/seq_file.rst | 354 ++++++++++++++++++++++++
> Documentation/core-api/index.rst | 1 +
> 2 files changed, 355 insertions(+)
> create mode 100644 Documentation/core-api/filesystems/seq_file.rst

When you convert an existing file, you'll want do to it by moving that file
over and converting it in place. We definitely do *not* want to leave the
old file in place after the conversion has been done.

It look slike you're creating a new part of the core-api manual here, which
seems good in general. In truth, I'm not sure that seq_file in particular
is really a filesystem topic, though; it's better grouped with things like
printk(). So we may not need a "filesystems" subsection quite yet.

> diff --git a/Documentation/core-api/filesystems/seq_file.rst b/Documentation/core-api/filesystems/seq_file.rst
> new file mode 100644
> index 0000000..a00004c
> --- /dev/null
> +++ b/Documentation/core-api/filesystems/seq_file.rst
> @@ -0,0 +1,354 @@
> +
> +======================
> +The seq_file interface
> +======================
> +
> + Copyright 2003 Jonathan Corbet <corbet@lwn.net>
> + This file is originally from the LWN.net Driver Porting series at
> + http://lwn.net/Articles/driver-porting/
> +
> +
> +There are numerous ways for a device driver (or other kernel component) to
> +provide information to the user or system administrator. One useful
> +technique is the creation of virtual files, in debugfs, /proc or elsewhere.
> +Virtual files can provide human-readable output that is easy to get at
> +without any special utility programs; they can also make life easier for
> +script writers. It is not surprising that the use of virtual files has
> +grown over the years.
> +
> +Creating those files correctly has always been a bit of a challenge,
> +however. It is not that hard to make a virtual file which returns a
> +string. But life gets trickier if the output is long - anything greater
> +than an application is likely to read in a single operation. Handling
> +multiple reads (and seeks) requires careful attention to the reader's
> +position within the virtual file - that position is, likely as not, in the
> +middle of a line of output. The kernel has traditionally had a number of
> +implementations that got this wrong.
> +
> +The 2.6 kernel contains a set of functions (implemented by Alexander Viro)

Note that 2.6 was some time ago. The "2.6" was relevant in 2003, when the
document was written, but I'd just take it out now.

> +which are designed to make it easy for virtual file creators to get it
> +right.
> +
> +The ``seq_file`` interface is available via ``<linux/seq_file.h>``. There are

In the interest of minimizing markup, it's probably best to not set off
terms like seq_file in this way.

> +three aspects to seq_file:
> +
> + * An iterator interface which lets a virtual file implementation
> + step through the objects it is presenting.
> +
> + * Some utility functions for formatting objects for output without
> + needing to worry about things like output buffers.
> +
> + * A set of canned ``file_operations`` which implement most operations on
> + the virtual file.
> +
> +We'll look at the seq_file interface via an extremely simple example: a
> +loadable module which creates a file called /proc/sequence. The file, when
> +read, simply produces a set of increasing integer values, one per line. The
> +sequence will continue until the user loses patience and finds something
> +better to do. The file is seekable, in that one can do something like the
> +following::
> +
> + dd if=/proc/sequence of=out1 count=1
> + dd if=/proc/sequence skip=1 of=out2 count=1
> +
> +Then concatenate the output files out1 and out2 and get the right
> +result. Yes, it is a thoroughly useless module, but the point is to show
> +how the mechanism works without getting lost in other details. (Those
> +wanting to see the full source for this module can find it at
> +http://lwn.net/Articles/22359/).
> +
> +Deprecated ``create_proc_entry``
> +--------------------------------
> +
> +Note that the above article uses create_proc_entry which was removed in
> +kernel 3.10. Current versions require the following update::
> +
> + - entry = create_proc_entry("sequence", 0, NULL);
> + - if (entry)
> + - entry->proc_fops = &ct_file_ops;
> + + entry = proc_create("sequence", 0, NULL, &ct_file_ops);

For extra credit, one could grab the above-mentioned module, port it to
current kernels, and stash the result in samples/.

> +The iterator interface
> +----------------------
> +
> +Modules implementing a virtual file with seq_file must implement a simple
> +iterator object that allows stepping through the data of interest.
> +Iterators must be able to move to a specific position - like the file they
> +implement - but the interpretation of that position is up to the iterator
> +itself. A seq_file implementation that is formatting firewall rules, for
> +example, could interpret position N as the Nth rule in the chain.
> +Positioning can thus be done in whatever way makes the most sense for the
> +generator of the data, which need not be aware of how a position translates
> +to an offset in the virtual file. The one obvious exception is that a
> +position of zero should indicate the beginning of the file.
> +
> +The /proc/sequence iterator just uses the count of the next number it
> +will output as its position.
> +
> +Four functions must be implemented to make the iterator work. The first,
> +called :c:func:`ct_seq_start()` takes a position as an argument and returns an
> +iterator which will start reading at that position. For our simple sequence example,
> +the start() function looks like::
> +
> + static void *ct_seq_start(struct seq_file *s, loff_t *pos)
> + {
> + loff_t *spos = kmalloc(sizeof(loff_t), GFP_KERNEL);
> + if (! spos)
> + return NULL;
> + *spos = *pos;
> + return spos;
> + }
> +
> +The entire data structure for this iterator is a single :c:type:`loff_t` value
> +holding the current position. There is no upper bound for the sequence
> +iterator, but that will not be the case for most other seq_file
> +implementations; in most cases the start() function should check for a
> +"past end of file" condition and return NULL if need be.
> +
> +For more complicated applications, the private field of the seq_file
> +structure can be used. There is also a special value which can be returned
> +by the start() function called :c:macro:`SEQ_START_TOKEN`; it can be used if you
> +wish to instruct your :c:func:`ct_seq_show()` function (described below) to print a
> +header at the top of the output. SEQ_START_TOKEN should only be used if the offset
> +is zero, however.
> +
> +The next function to implement is called, amazingly, :c:func:`ct_seq_next()`;
> +its job is to move the iterator forward to the next position in the sequence. The
> +example module can simply increment the position by one; more useful
> +modules will do what is needed to step through some data structure. The
> +next() function returns a new iterator, or NULL if the sequence is
> +complete. Here's the example version::
> +
> + static void *ct_seq_next(struct seq_file *s, void *v, loff_t *pos)
> + {
> + loff_t *spos = v;
> + *pos = ++*spos;
> + return spos;
> + }
> +
> +The :c:func:`ct_seq_stop()` function is called when iteration is complete; its
> +job, of course, is to clean up. If dynamic memory is allocated for the iterator,
> +stop() is the place to free it.::

That period will look funny in the formatted output, it shuold come out.

> + static void ct_seq_stop(struct seq_file *s, void *v)
> + {
> + kfree(v);
> + }
> +
> +Finally, the :c:func:`ct_seq_show()` function should format the object currently
> +pointed to by the iterator for output. The example module's show() function is::
> +
> + static int ct_seq_show(struct seq_file *s, void *v)
> + {
> + loff_t *spos = v;
> + seq_printf(s, "%lld\n", (long long)*spos);
> + return 0;
> + }
> +
> +If all is well, the show() function should return zero. A negative error
> +code in the usual manner indicates that something went wrong; it will be
> +passed back to user space. This function can also return :c:type:`SEQ_SKIP`, which
> +causes the current item to be skipped; if the show() function has already
> +generated output before returning SEQ_SKIP, that output will be dropped.
> +
> +We will look at :c:func:`seq_printf()` in a moment. But first, the definition of the
> +seq_file iterator is finished by creating a :c:type:`seq_operations` structure with
> +the four functions we have just defined::
> +
> + static const struct seq_operations ct_seq_ops = {
> + .start = ct_seq_start,
> + .next = ct_seq_next,
> + .stop = ct_seq_stop,
> + .show = ct_seq_show
> + };
> +
> +This structure will be needed to tie our iterator to the /proc file in
> +a little bit.
> +
> +It's worth noting that the iterator value returned by start() and
> +manipulated by the other functions is considered to be completely opaque by
> +the seq_file code. It can thus be anything that is useful in stepping
> +through the data to be output. Counters can be useful, but it could also be
> +a direct pointer into an array or linked list. Anything goes, as long as
> +the programmer is aware that things can happen between calls to the
> +iterator function. However, the seq_file code (by design) will not sleep
> +between the calls to start() and stop(), so holding a lock during that time
> +is a reasonable thing to do. The seq_file code will also avoid taking any
> +other locks while the iterator is active.
> +
> +
> +Formatted output
> +----------------
> +
> +The seq_file code manages positioning within the output created by the
> +iterator and getting it into the user's buffer. But, for that to work, that
> +output must be passed to the seq_file code. Some utility functions have
> +been defined which make this task easy.
> +
> +Most code will simply use :c:func:`seq_printf()`, which works pretty much like
> +printk(), but which requires the seq_file pointer as an argument.
> +
> +For straight character output, the following functions may be used::
> +
> + seq_putc(struct seq_file *m, char c);
> + seq_puts(struct seq_file *m, const char *s);
> + seq_escape(struct seq_file *m, const char *s, const char *esc);
> +
> +The first two output a single character and a string, just like one would
> +expect. :c:func:`seq_escape()` is like :c:func:`seq_puts()`, except that any
> +character in s which is in the string esc will be represented in octal form in
> +the output.
> +
> +There are also a pair of functions for printing filenames::
> +
> + int seq_path(struct seq_file *m, const struct path *path,
> + const char *esc);
> + int seq_path_root(struct seq_file *m, const struct path *path,
> + const struct path *root, const char *esc)
> +
> +Here, path indicates the file of interest, and esc is a set of characters
> +which should be escaped in the output. A call to :c:func:`seq_path()` will
> +output the path relative to the current process's filesystem root. If a
> +different root is desired, it can be used with :c:func:`seq_path_root()`. If
> +it turns out that path cannot be reached from root, seq_path_root() returns
> +:c:macro:`SEQ_SKIP`.
> +
> +A function producing complicated output may want to check
> + bool seq_has_overflowed(struct seq_file *m);
> +and avoid further seq_<output> calls if true is returned.
> +
> +A true return from :c:func:`seq_has_overflowed()` means that the seq_file buffer
> +will be discarded and the seq_show function will attempt to allocate a larger
> +buffer and retry printing.
> +
> +
> +Making it all work
> +------------------
> +
> +So far, we have a nice set of functions which can produce output within the
> +seq_file system, but we have not yet turned them into a file that a user
> +can see. Creating a file within the kernel requires, of course, the
> +creation of a set of file_operations which implement the operations on that
> +file. The seq_file interface provides a set of canned operations which do
> +most of the work. The virtual file author still must implement the :c:func:`ct_open()`
> +method, however, to hook everything up. The open function is often a single
> +line, as in the example module::
> +
> + static int ct_open(struct inode *inode, struct file *file)
> + {
> + return seq_open(file, &ct_seq_ops);
> + }
> +
> +Here, the call to seq_open() takes the seq_operations structure we created

You use the c:func notation elsewhere, but *here* is a place where sphinx
would make an actual link to the kerneldoc information. That's where such
markup is most useful, IMO.

> +before, and gets set up to iterate through the virtual file.
> +
> +On a successful open, seq_open() stores the struct seq_file pointer in
> +``file->private_data``. If you have an application where the same iterator can
> +be used for more than one file, you can store an arbitrary pointer in the
> +private field of the seq_file structure; that value can then be retrieved
> +by the iterator functions.
> +
> +There is also a wrapper function to seq_open() called :c:func:`seq_open_private()`.
> +It kmallocs a zero filled block of memory and stores a pointer to it in the
> +private field of the seq_file structure, returning 0 on success. The
> +block size is specified in a third parameter to the function, e.g.::
> +
> + static int ct_open(struct inode *inode, struct file *file)
> + {
> + return seq_open_private(file, &ct_seq_ops,
> + sizeof(struct mystruct));
> + }
> +
> +There is also a variant function, :c:func:`__seq_open_private()`, which is
> +functionally identical except that, if successful, it returns the pointer to the
> +allocated memory block, allowing further initialisation e.g.::
> +
> + static int ct_open(struct inode *inode, struct file *file)
> + {
> + struct mystruct *p =
> + __seq_open_private(file, &ct_seq_ops, sizeof(*p));
> +
> + if (!p)
> + return -ENOMEM;
> +
> + p->foo = bar; /* initialize my stuff */
> + ...
> + p->baz = true;
> +
> + return 0;
> + }
> +
> +A corresponding close function, :c:func:`seq_release_private()` is available
> +which frees the memory allocated in the corresponding open.
> +
> +The other operations of interest - read(), llseek(), and release() - are
> +all implemented by the seq_file code itself. So a virtual file's
> +file_operations structure will look like::
> +
> + static const struct file_operations ct_file_ops = {
> + .owner = THIS_MODULE,
> + .open = ct_open,
> + .read = seq_read,
> + .llseek = seq_lseek,
> + .release = seq_release
> + };
> +
> +There is also a seq_release_private() which passes the contents of the
> +seq_file private field to kfree() before releasing the structure.
> +
> +The final step is the creation of the /proc file itself. In the example
> +code, that is done in the initialization code in the usual way::
> +
> + static int ct_init(void)
> + {
> + struct proc_dir_entry *entry;
> +
> + proc_create("sequence", 0, NULL, &ct_file_ops);
> + return 0;
> + }
> +
> + module_init(ct_init);
> +
> +And that is pretty much it.
> +
> +
> +seq_list
> +--------
> +
> +If your file will be iterating through a linked list, you may find these
> +routines useful::
> +
> + struct list_head *seq_list_start(struct list_head *head,
> + loff_t pos);
> + struct list_head *seq_list_start_head(struct list_head *head,
> + loff_t pos);
> + struct list_head *seq_list_next(void *v, struct list_head *head,
> + loff_t *ppos);
> +
> +These helpers will interpret pos as a position within the list and iterate
> +accordingly. Your start() and next() functions need only invoke the
> +seq_list_* helpers with a pointer to the appropriate :c:func:`list_head` structure.
> +
> +
> +The extra-simple version
> +------------------------
> +
> +For extremely simple virtual files, there is an even easier interface. A
> +module can define only the show() function, which should create all the
> +output that the virtual file will contain. The file's open() method then
> +calls::
> +
> + int single_open(struct file *file,
> + int (*show)(struct seq_file *m, void *p),
> + void *data);
> +
> +When output time comes, the show() function will be called once. The data
> +value given to :c:func:`single_open()` can be found in the private field of the
> +seq_file structure. When using single_open(), the programmer should use
> +single_release() instead of seq_release() in the file_operations structure
> +to avoid a memory leak.
> +
> +Functions
> +---------
> +
> +.. kernel-doc:: include/linux/seq_file.h

I almost wonder if we might want to put this up near the start, with the
more tutorial-oriented material coming after? Not sure.

> diff --git a/Documentation/core-api/index.rst b/Documentation/core-api/index.rst
> index 62abd36..9844ae0 100644
> --- a/Documentation/core-api/index.rst
> +++ b/Documentation/core-api/index.rst
> @@ -19,6 +19,7 @@ Core utilities
> workqueue
> genericirq
> flexible-arrays
> + filesystems/seq_file

OK, so you're not really creating a separate section of the manual yet.
That's fine. I'm still not sure we want seq_file in a separate
"filesystems" directory, but it's not something I'm going to make a fuss
about either.

The last thing is: seq_file has changed just a bit since I wrote this
document, and there's a fair amount that isn't covered here. It would be
great to expand the discussion in the documentation to match the current
state of the interface, and fantastic to have the sample module updated to
use some of the newer features. That is all extra work beyond what you've
taken on so far, of course...what do you think? :)

Thanks,

jon

\
 
 \ /
  Last update: 2017-06-12 00:33    [W:0.632 / U:0.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site