lkml.org 
[lkml]   [2017]   [Jun]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.11 030/115] net: phy: marvell: Limit errata to 88m1101
Date
4.11-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andrew Lunn <andrew@lunn.ch>


[ Upstream commit f2899788353c13891412b273fdff5f02d49aa40f ]

The 88m1101 has an errata when configuring autoneg. However, it was
being applied to many other Marvell PHYs as well. Limit its scope to
just the 88m1101.

Fixes: 76884679c644 ("phylib: Add support for Marvell 88e1111S and 88e1145")
Reported-by: Daniel Walker <danielwa@cisco.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Harini Katakam <harinik@xilinx.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/phy/marvell.c | 66 +++++++++++++++++++++++++---------------------
1 file changed, 37 insertions(+), 29 deletions(-)

--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -255,34 +255,6 @@ static int marvell_config_aneg(struct ph
{
int err;

- /* The Marvell PHY has an errata which requires
- * that certain registers get written in order
- * to restart autonegotiation */
- err = phy_write(phydev, MII_BMCR, BMCR_RESET);
-
- if (err < 0)
- return err;
-
- err = phy_write(phydev, 0x1d, 0x1f);
- if (err < 0)
- return err;
-
- err = phy_write(phydev, 0x1e, 0x200c);
- if (err < 0)
- return err;
-
- err = phy_write(phydev, 0x1d, 0x5);
- if (err < 0)
- return err;
-
- err = phy_write(phydev, 0x1e, 0);
- if (err < 0)
- return err;
-
- err = phy_write(phydev, 0x1e, 0x100);
- if (err < 0)
- return err;
-
err = marvell_set_polarity(phydev, phydev->mdix_ctrl);
if (err < 0)
return err;
@@ -316,6 +288,42 @@ static int marvell_config_aneg(struct ph
return 0;
}

+static int m88e1101_config_aneg(struct phy_device *phydev)
+{
+ int err;
+
+ /* This Marvell PHY has an errata which requires
+ * that certain registers get written in order
+ * to restart autonegotiation
+ */
+ err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, 0x1d, 0x1f);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, 0x1e, 0x200c);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, 0x1d, 0x5);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, 0x1e, 0);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, 0x1e, 0x100);
+ if (err < 0)
+ return err;
+
+ return marvell_config_aneg(phydev);
+}
+
static int m88e1111_config_aneg(struct phy_device *phydev)
{
int err;
@@ -1892,7 +1900,7 @@ static struct phy_driver marvell_drivers
.flags = PHY_HAS_INTERRUPT,
.probe = marvell_probe,
.config_init = &marvell_config_init,
- .config_aneg = &marvell_config_aneg,
+ .config_aneg = &m88e1101_config_aneg,
.read_status = &genphy_read_status,
.ack_interrupt = &marvell_ack_interrupt,
.config_intr = &marvell_config_intr,

\
 
 \ /
  Last update: 2017-06-12 00:26    [W:0.340 / U:2.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site