lkml.org 
[lkml]   [2017]   [Jun]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/3] pinctrl: intel: Make it possible to specify mode per pin in a group
Date
On some SoCs not all pins in a group use the same mode when a certain
function is muxed out of them. This makes it possible to specify mode per
pin as an array instead in addition to single integer.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
---
drivers/pinctrl/intel/pinctrl-intel.c | 6 +++++-
drivers/pinctrl/intel/pinctrl-intel.h | 28 +++++++++++++++++++++-------
2 files changed, 26 insertions(+), 8 deletions(-)

diff --git a/drivers/pinctrl/intel/pinctrl-intel.c b/drivers/pinctrl/intel/pinctrl-intel.c
index dd2e2ee7fc92..cc60db483dfa 100644
--- a/drivers/pinctrl/intel/pinctrl-intel.c
+++ b/drivers/pinctrl/intel/pinctrl-intel.c
@@ -398,7 +398,11 @@ static int intel_pinmux_set_mux(struct pinctrl_dev *pctldev, unsigned function,
value = readl(padcfg0);

value &= ~PADCFG0_PMODE_MASK;
- value |= grp->mode << PADCFG0_PMODE_SHIFT;
+
+ if (grp->modes)
+ value |= grp->modes[i] << PADCFG0_PMODE_SHIFT;
+ else
+ value |= grp->mode << PADCFG0_PMODE_SHIFT;

writel(value, padcfg0);
}
diff --git a/drivers/pinctrl/intel/pinctrl-intel.h b/drivers/pinctrl/intel/pinctrl-intel.h
index fc7b3dc15eec..8298fc2230cf 100644
--- a/drivers/pinctrl/intel/pinctrl-intel.h
+++ b/drivers/pinctrl/intel/pinctrl-intel.h
@@ -22,13 +22,16 @@ struct device;
* @name: Name of the groups
* @pins: All pins in this group
* @npins: Number of pins in this groups
- * @mode: Native mode in which the group is muxed out @pins
+ * @mode: Native mode in which the group is muxed out @pins. Used if @modes
+ * is %NULL.
+ * @modes: If not %NULL this will hold mode for each pin in @pins
*/
struct intel_pingroup {
const char *name;
const unsigned *pins;
size_t npins;
unsigned short mode;
+ const unsigned *modes;
};

/**
@@ -111,12 +114,23 @@ struct intel_community {
#define PINCTRL_FEATURE_DEBOUNCE BIT(0)
#define PINCTRL_FEATURE_1K_PD BIT(1)

-#define PIN_GROUP(n, p, m) \
- { \
- .name = (n), \
- .pins = (p), \
- .npins = ARRAY_SIZE((p)), \
- .mode = (m), \
+/**
+ * PIN_GROUP - Declare a pin group
+ * @n: Name of the group
+ * @p: An array of pins this group consists
+ * @m: Mode which the pins are put when this group is active. Can be either
+ * a single integer or an array of integers in which case mode is per
+ * pin.
+ */
+#define PIN_GROUP(n, p, m) \
+ { \
+ .name = (n), \
+ .pins = (p), \
+ .npins = ARRAY_SIZE((p)), \
+ .mode = __builtin_choose_expr( \
+ __builtin_constant_p((m)), (m), 0), \
+ .modes = __builtin_choose_expr( \
+ __builtin_constant_p((m)), NULL, (m)), \
}

#define FUNCTION(n, g) \
--
2.11.0
\
 
 \ /
  Last update: 2017-06-12 00:21    [W:0.062 / U:2.392 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site