Messages in this thread |  | | Date | Mon, 5 Jun 2017 10:13:27 +0800 | | From | Shawn Guo <> | | Subject | Re: [PATCH v1 5/5] ARM: dts: imx6: RIoTboard provide Standby to PowerOff option |
| |
On Mon, Jun 05, 2017 at 09:50:29AM +0800, Shawn Guo wrote: > On Mon, May 29, 2017 at 07:09:24PM +0200, Oleksij Rempel wrote: > > This board, as well as some other boards with i.MX6 and a PMIC, uses a > > "MPIC_STBY_REQ" line to notify the PMIC about a state change. > > The PMIC is programmed for a specific state change before triggering the > > line. > > In this case, PMIC_STBY_REQ can be used for Stand by, Sleep > > and Power off modes. > > > > Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> > > Cc: kernel@pengutronix.de > > Cc: linux-arm-kernel@lists.infradead.org > > Cc: Shawn Guo <shawnguo@kernel.org> > > Cc: Fabio Estevam <fabio.estevam@nxp.com> > > Cc: Rob Herring <robh+dt@kernel.org> > > Cc: Mark Rutland <mark.rutland@arm.com> > > Cc: Russell King <linux@armlinux.org.uk> > > Cc: devicetree@vger.kernel.org > > Cc: linux-kernel@vger.kernel.org > > --- > > arch/arm/boot/dts/imx6dl-riotboard.dts | 5 +++++ > > 1 file changed, 5 insertions(+) > > > > diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts > > index 2cb72824e800..b5f25fe7b809 100644 > > --- a/arch/arm/boot/dts/imx6dl-riotboard.dts > > +++ b/arch/arm/boot/dts/imx6dl-riotboard.dts > > @@ -90,6 +90,10 @@ > > status = "okay"; > > }; > > > > +&clks { > > + fsl,pmic_stby_poweroff; > > +}; > > + > > &fec { > > pinctrl-names = "default"; > > pinctrl-0 = <&pinctrl_enet>; > > @@ -125,6 +129,7 @@ > > reg = <0x08>; > > interrupt-parent = <&gpio5>; > > interrupts = <16 8>; > > + fsl,pmic_stby_poweroff; > > Is this property supported by upstream kernel?
Okay, just noticed that it's the last patch of series adding fsl,pmic_stby_poweroff support.
Shawn
|  |