lkml.org 
[lkml]   [2017]   [Jun]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[tip:x86/mm] x86/mm: Delete a big outdated comment about TLB flushing
Commit-ID:  8781fb7e9749da424e01daacd14834b674658c63
Gitweb: http://git.kernel.org/tip/8781fb7e9749da424e01daacd14834b674658c63
Author: Andy Lutomirski <luto@kernel.org>
AuthorDate: Thu, 29 Jun 2017 08:53:14 -0700
Committer: Ingo Molnar <mingo@kernel.org>
CommitDate: Fri, 30 Jun 2017 10:12:35 +0200

x86/mm: Delete a big outdated comment about TLB flushing

The comment describes the old explicit IPI-based flush logic, which
is long gone.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/55e44997e56086528140c5180f8337dc53fb7ffc.1498751203.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
arch/x86/mm/tlb.c | 36 ------------------------------------
1 file changed, 36 deletions(-)

diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c
index 1cc4783..014d07a 100644
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -153,42 +153,6 @@ void switch_mm_irqs_off(struct mm_struct *prev, struct mm_struct *next,
switch_ldt(real_prev, next);
}

-/*
- * The flush IPI assumes that a thread switch happens in this order:
- * [cpu0: the cpu that switches]
- * 1) switch_mm() either 1a) or 1b)
- * 1a) thread switch to a different mm
- * 1a1) set cpu_tlbstate to TLBSTATE_OK
- * Now the tlb flush NMI handler flush_tlb_func won't call leave_mm
- * if cpu0 was in lazy tlb mode.
- * 1a2) update cpu active_mm
- * Now cpu0 accepts tlb flushes for the new mm.
- * 1a3) cpu_set(cpu, new_mm->cpu_vm_mask);
- * Now the other cpus will send tlb flush ipis.
- * 1a4) change cr3.
- * 1a5) cpu_clear(cpu, old_mm->cpu_vm_mask);
- * Stop ipi delivery for the old mm. This is not synchronized with
- * the other cpus, but flush_tlb_func ignore flush ipis for the wrong
- * mm, and in the worst case we perform a superfluous tlb flush.
- * 1b) thread switch without mm change
- * cpu active_mm is correct, cpu0 already handles flush ipis.
- * 1b1) set cpu_tlbstate to TLBSTATE_OK
- * 1b2) test_and_set the cpu bit in cpu_vm_mask.
- * Atomically set the bit [other cpus will start sending flush ipis],
- * and test the bit.
- * 1b3) if the bit was 0: leave_mm was called, flush the tlb.
- * 2) switch %%esp, ie current
- *
- * The interrupt must handle 2 special cases:
- * - cr3 is changed before %%esp, ie. it cannot use current->{active_,}mm.
- * - the cpu performs speculative tlb reads, i.e. even if the cpu only
- * runs in kernel space, the cpu could load tlb entries for user space
- * pages.
- *
- * The good news is that cpu_tlbstate is local to each cpu, no
- * write/read ordering problems.
- */
-
static void flush_tlb_func_common(const struct flush_tlb_info *f,
bool local, enum tlb_flush_reason reason)
{
\
 
 \ /
  Last update: 2017-06-30 23:13    [W:0.405 / U:0.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site