lkml.org 
[lkml]   [2017]   [Jun]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v2 3/4] ARM: dts: rockchip: set pre/post pwm-delay-us property.
    Date
    For veyron the binding should provide both pwm timings, the delay between
    you enable the PWM and set the enable signal, and the delay between you
    disable the PWM signal and clear the enable signal. Update the binding
    accordingly, in this case the panels connected to the veyron boards have
    a symetric power sequence, hence the same value is used.

    Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
    ---
    Changes since v1:
    - Add this new patch to fix current binding on veyron.

    arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi | 2 +-
    1 file changed, 1 insertion(+), 1 deletion(-)

    diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
    index d752a31..c0e8ce2 100644
    --- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
    +++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
    @@ -96,7 +96,7 @@
    pinctrl-names = "default";
    pinctrl-0 = <&bl_en>;
    pwms = <&pwm0 0 1000000 0>;
    - pwm-delay-us = <10000>;
    + pwm-delay-us = <10000 10000>;
    };

    gpio-charger {
    --
    2.9.3
    \
     
     \ /
      Last update: 2017-06-30 23:11    [W:2.895 / U:1.676 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site