lkml.org 
[lkml]   [2017]   [Jun]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] Modified imx7d-sdb.dts file so that VLDO4 provides 2.8V for MIPI CSI/DSI
Hi Gautam,

On Wed, Jun 28, 2017 at 2:45 PM, mindentropy <mindentropy@gmail.com> wrote:
> From: Gautam Bhat <mindentropy@gmail.com>
>
> * According to mx7sabresd schematics the MIPI CSI/DSI voltage rails
> should be 2.8V but the voltage provided is a maximum of 3.3V and
> minimum of 1.8V. Providing such a higher voltage might damage the
> peripherals and violates the schematic settings.
>
> Signed-off-by: Gautam Bhat <mindentropy@gmail.com>

Patch looks good, but the Subject could be improved to something like:

ARM: dts: imx7d-sdb: Set LDO4 to 2.8V

\
 
 \ /
  Last update: 2017-06-28 22:20    [W:0.102 / U:0.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site