lkml.org 
[lkml]   [2017]   [Jun]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/8] usb: bdc: Add Device Tree binding document for Broadcom BDC driver
Date
Add Device Tree binding document for Broadcom USB Device
Controller (BDC).

Signed-off-by: Al Cooper <alcooperx@gmail.com>
---
.../devicetree/bindings/usb/brcm,bdc-udc.txt | 28 ++++++++++++++++++++++
1 file changed, 28 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/brcm,bdc-udc.txt

diff --git a/Documentation/devicetree/bindings/usb/brcm,bdc-udc.txt b/Documentation/devicetree/bindings/usb/brcm,bdc-udc.txt
new file mode 100644
index 0000000..4eeaddb
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/brcm,bdc-udc.txt
@@ -0,0 +1,28 @@
+Broadcom USB Device Controller (BDC)
+====================================
+
+Required properties:
+
+- compatible: must be one of:
+ "brcm,bdc-udc-v0.16"
+ "brcm,bdc-udc"
+- reg: the base register address and length
+- interrupts: ther interrupt line for this controller
+
+Optional properties:
+
+On Broadcom STB platforms, these properties are required:
+
+- phys: phandle to the USB PHY blocks
+- clocks: phandle to the functional clock of this block
+
+Example:
+
+ udc@f0b02000 {
+ status = "disabled";
+ compatible = "brcm,bdc-udc-v0.16";
+ reg = <0xf0b02000 0xfc4>;
+ interrupts = <0x0 0x60 0x0>;
+ phys = <&usbphy_0 0x0>;
+ clocks = <&sw_usbd>;
+ };
--
1.9.0.138.g2de3478
\
 
 \ /
  Last update: 2017-06-27 20:28    [W:0.099 / U:0.724 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site