lkml.org 
[lkml]   [2017]   [Jun]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 3/3] ARM: dts: exynos: Remove the display-timing and delay from rinato dts
Date
The display-timing and delay are included in the panel driver. So it
should be removed in dts.

Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
---
arch/arm/boot/dts/exynos3250-rinato.dts | 22 ----------------------
1 file changed, 22 deletions(-)

diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
index de2702e..3df88383 100644
--- a/arch/arm/boot/dts/exynos3250-rinato.dts
+++ b/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -227,28 +227,6 @@
vci-supply = <&ldo20_reg>;
reset-gpios = <&gpe0 1 GPIO_ACTIVE_LOW>;
te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
- power-on-delay= <30>;
- power-off-delay= <120>;
- reset-delay = <5>;
- init-delay = <100>;
- flip-horizontal;
- flip-vertical;
- panel-width-mm = <29>;
- panel-height-mm = <29>;
-
- display-timings {
- timing-0 {
- clock-frequency = <4600000>;
- hactive = <320>;
- vactive = <320>;
- hfront-porch = <1>;
- hback-porch = <1>;
- hsync-len = <1>;
- vfront-porch = <150>;
- vback-porch = <1>;
- vsync-len = <2>;
- };
- };
};
};

--
1.9.1
\
 
 \ /
  Last update: 2017-06-27 04:16    [W:0.055 / U:0.356 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site