lkml.org 
[lkml]   [2017]   [Jun]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/6] drivers/i2c: Add FSI-attached I2C master algorithm
Date
From: "Edward A. James" <eajames@us.ibm.com>

This series adds an algorithm for an I2C master physically located on an FSI
slave device. The I2C master has multiple ports, each of which may be connected
to an I2C slave. Access to the I2C master registers is achieved over FSI bus.

Due to the multi-port nature of the I2C master, the driver instantiates a new
I2C adapter for each port connected to a slave. The connected ports should be
defined in the device tree under the I2C master device.

Edward A. James (6):
drivers/i2c: Add FSI-attached I2C master algorithm
drivers/i2c: Add port structure to FSI algorithm
drivers/i2c: Add transfer implementation for FSI algorithm
drivers/i2c: Add I2C master locking to FSI algorithm
drivers/i2c: Add bus recovery for FSI algorithm
Documentation/devicetree: Add FSI-attached I2C master dt bindings

Documentation/devicetree/bindings/i2c/i2c-fsi.txt | 31 +
drivers/i2c/busses/Kconfig | 11 +
drivers/i2c/busses/Makefile | 1 +
drivers/i2c/busses/i2c-fsi.c | 656 ++++++++++++++++++++++
4 files changed, 699 insertions(+)
create mode 100644 Documentation/devicetree/bindings/i2c/i2c-fsi.txt
create mode 100644 drivers/i2c/busses/i2c-fsi.c

--
1.8.3.1

\
 
 \ /
  Last update: 2017-06-26 21:34    [W:0.075 / U:0.520 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site