lkml.org 
[lkml]   [2017]   [Jun]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v1 1/6] DT bindings: add bindings for ov965x camera module
On Thu, Jun 22, 2017 at 05:05:37PM +0200, Hugues Fruchet wrote:
> From: "H. Nikolaus Schaller" <hns@goldelico.com>
>
> This adds documentation of device tree bindings
> for the OV965X family camera sensor module.
>
> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
> Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
> ---
> .../devicetree/bindings/media/i2c/ov965x.txt | 37 ++++++++++++++++++++++
> 1 file changed, 37 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/i2c/ov965x.txt
>
> diff --git a/Documentation/devicetree/bindings/media/i2c/ov965x.txt b/Documentation/devicetree/bindings/media/i2c/ov965x.txt
> new file mode 100644
> index 0000000..0e0de1f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/ov965x.txt
> @@ -0,0 +1,37 @@
> +* Omnivision OV9650/9652/9655 CMOS sensor
> +
> +The Omnivision OV965x sensor support multiple resolutions output, such as
> +CIF, SVGA, UXGA. It also can support YUV422/420, RGB565/555 or raw RGB
> +output format.
> +
> +Required Properties:
> +- compatible: should be one of
> + "ovti,ov9650"
> + "ovti,ov9652"
> + "ovti,ov9655"
> +- clocks: reference to the mclk input clock.
> +
> +Optional Properties:
> +- resetb-gpios: reference to the GPIO connected to the resetb pin, if any.

reset-gpios and state it is active low.

> +- pwdn-gpios: reference to the GPIO connected to the pwdn pin, if any.

powerdown-gpios and state it is active ???.

Those are semi-standard names.

With that,

Acked-by: Rob Herring <robh@kernel.org>

\
 
 \ /
  Last update: 2017-06-26 20:54    [W:1.749 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site