lkml.org 
[lkml]   [2017]   [Jun]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH] ACPI / sleep: EC-based wakeup from suspend-to-idle on recent systems
Date
Hi, Rafael

> From: Rafael J. Wysocki [mailto:rjw@rjwysocki.net]
> Subject: [PATCH] ACPI / sleep: EC-based wakeup from suspend-to-idle on recent systems
>
> From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
>
> Some recent Dell laptops, including the XPS13 model numbers 9360 and
> 9365, cannot be woken up from suspend-to-idle by pressing the power
> button which is unexpected and makes that feature less usable on
> those systems. Moreover, on the 9365 ACPI S3 (suspend-to-RAM) is
> not expected to be used at all (the OS these systems ship with never
> exercises the ACPI S3 path in the firmware) and suspend-to-idle is
> the only viable system suspend mechanism there.
>
> The reason why the power button wakeup from suspend-to-idle doesn't
> work on those systems is because their power button events are
> signaled by the EC (Embedded Controller), whose GPE (General Purpose
> Event) line is disabled during suspend-to-idle transitions in Linux.
> That is done on purpose, because in general the EC tends to be noisy
> for various reasons (battery and thermal updates and similar, for
> example) and all events signaled by it would kick the CPUs out of
> deep idle states while in suspend-to-idle, which effectively might
> defeat its purpose.
>
> Of course, on the Dell systems in question the EC GPE must be enabled
> during suspend-to-idle transitions for the button press events to
> be signaled while suspended at all, but fortunately there is a way
> out of this puzzle.
>
> First of all, those systems have the ACPI_FADT_LOW_POWER_S0 flag set
> in their ACPI tables, which means that the OS is expected to prefer
> the "low power S0 idle" system state over ACPI S3 on them. That
> causes the most recent versions of other OSes to simply ignore ACPI
> S3 on those systems, so it is reasonable to expect that it should not
> be necessary to block GPEs during suspend-to-idle on them.
>
> Second, in addition to that, the systems in question provide a special
> firmware interface that can be used to indicate to the platform that
> the OS is transitioning into a system-wide low-power state in which
> certain types of activity are not desirable or that it is leaving
> such a state and that (in principle) should allow the platform to
> adjust its operation mode accordingly.
>
> That interface is a special _DSM object under a System Power
> Management Controller device (PNP0D80). The expected way to use it
> is to invoke function 0 from it on system initialization, functions
> 3 and 5 during suspend transitions and functions 4 and 6 during
> resume transitions (to reverse the actions carried out by the
> former). In particular, function 5 from the "Low-Power S0" device
> _DSM is expected to cause the platform to put itself into a low-power
> operation mode which should include making the EC less verbose (so to
> speak). Next, on resume, function 6 switches the platform back to
> the "working-state" operation mode.
>
> In accordance with the above, modify the ACPI suspend-to-idle code
> to look for the "Low-Power S0" _DSM interface on platforms with the
> ACPI_FADT_LOW_POWER_S0 flag set in the ACPI tables. If it's there,
> use it during suspend-to-idle transitions as prescribed and avoid
> changing the GPE configuration in that case. [That should reflect
> what the most recent versions of other OSes do.]
>
> Also modify the ACPI EC driver to make it handle events during
> suspend-to-idle in the usual way if the "Low-Power S0" _DSM interface
> is going to be used to make the power button events work while
> suspended on the Dell machines mentioned above
>
> Link: http://www.uefi.org/sites/default/files/resources/Intel_ACPI_Low_Power_S0_Idle.pdf
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> ---
>
> This is a replacement for https://patchwork.kernel.org/patch/9797909/
>
> The changelog describes what is going on (and now the "Low-Power S0" _DSM
> specification is public, so it can be used officially here) and it gets the job
> done on the XPS13 9360. [The additional sort of "bonus" is that the machine
> looks "suspended" in s2idle now, as one of the effects of the _DSM appears
> to be turning off the lights in a quite literal sense.]
>
> The patch is based on https://patchwork.kernel.org/patch/9797913/ and
> https://patchwork.kernel.org/patch/9797903/ on top of the current linux-next.
>
> Thanks,
> Rafael
>
> ---
> drivers/acpi/ec.c | 2
> drivers/acpi/internal.h | 2
> drivers/acpi/sleep.c | 107 ++++++++++++++++++++++++++++++++++++++++++++++--
> 3 files changed, 107 insertions(+), 4 deletions(-)
>
> Index: linux-pm/drivers/acpi/sleep.c
> ===================================================================
> --- linux-pm.orig/drivers/acpi/sleep.c
> +++ linux-pm/drivers/acpi/sleep.c
> @@ -652,6 +652,84 @@ static const struct platform_suspend_ops
>
> static bool s2idle_wakeup;
>
> +/*
> + * On platforms supporting the Low Power S0 Idle interface there is an ACPI
> + * device object with the PNP0D80 compatible device ID (System Power Management
> + * Controller) and a specific _DSM method under it. That method, if present,
> + * can be used to indicate to the platform that the OS is transitioning into a
> + * low-power state in which certain types of activity are not desirable or that
> + * it is leaving such a state, which allows the platform to adjust its operation
> + * mode accordingly.
> + */
> +static const struct acpi_device_id lps0_device_ids[] = {
> + {"PNP0D80", },
> + {"", },
> +};
> +
> +#define ACPI_LPS0_DSM_UUID "c4eb40a0-6cd2-11e2-bcfd-0800200c9a66"
> +
> +#define ACPI_LPS0_SCREEN_OFF 3
> +#define ACPI_LPS0_SCREEN_ON 4
> +#define ACPI_LPS0_ENTRY 5
> +#define ACPI_LPS0_EXIT 6
> +
> +#define ACPI_S2IDLE_FUNC_MASK ((1 << ACPI_LPS0_ENTRY) | (1 << ACPI_LPS0_EXIT))
> +
> +static acpi_handle lps0_device_handle;
> +static guid_t lps0_dsm_guid;
> +static char lps0_dsm_func_mask;
> +
> +static void acpi_sleep_run_lps0_dsm(unsigned int func)
> +{
> + union acpi_object *out_obj;
> +
> + if (!(lps0_dsm_func_mask & (1 << func)))
> + return;
> +
> + out_obj = acpi_evaluate_dsm(lps0_device_handle, &lps0_dsm_guid, 1, func, NULL);
> + ACPI_FREE(out_obj);
> +
> + acpi_handle_debug(lps0_device_handle, "_DSM function %u evaluation %s\n",
> + func, out_obj ? "successful" : "failed");
> +}
> +
> +static int lps0_device_attach(struct acpi_device *adev,
> + const struct acpi_device_id *not_used)
> +{
> + union acpi_object *out_obj;
> +
> + if (lps0_device_handle)
> + return 0;
> +
> + if (!(acpi_gbl_FADT.flags & ACPI_FADT_LOW_POWER_S0))
> + return 0;
> +
> + guid_parse(ACPI_LPS0_DSM_UUID, &lps0_dsm_guid);
> + /* Check if the _DSM is present and as expected. */
> + out_obj = acpi_evaluate_dsm(adev->handle, &lps0_dsm_guid, 1, 0, NULL);
> + if (out_obj && out_obj->type == ACPI_TYPE_BUFFER) {
> + char bitmask = *(char *)out_obj->buffer.pointer;
> +
> + if ((bitmask & ACPI_S2IDLE_FUNC_MASK) == ACPI_S2IDLE_FUNC_MASK) {
> + lps0_dsm_func_mask = bitmask;
> + lps0_device_handle = adev->handle;
> + }
> +
> + acpi_handle_debug(adev->handle, "_DSM function mask: 0x%x\n",
> + bitmask);
> + } else {
> + acpi_handle_debug(adev->handle,
> + "_DSM function 0 evaluation failed\n");
> + }
> + ACPI_FREE(out_obj);
> + return 0;
> +}
> +
> +static struct acpi_scan_handler lps0_handler = {
> + .ids = lps0_device_ids,
> + .attach = lps0_device_attach,
> +};
> +
> static int acpi_freeze_begin(void)
> {
> acpi_scan_lock_acquire();
> @@ -660,8 +738,18 @@ static int acpi_freeze_begin(void)
>
> static int acpi_freeze_prepare(void)
> {
> - acpi_enable_all_wakeup_gpes();
> - acpi_os_wait_events_complete();
> + if (lps0_device_handle) {
> + acpi_sleep_run_lps0_dsm(ACPI_LPS0_SCREEN_OFF);
> + acpi_sleep_run_lps0_dsm(ACPI_LPS0_ENTRY);
> + } else {
> + /*
> + * The configuration of GPEs is changed here to avoid spurious
> + * wakeups, but that should not be necessary if this is a
> + * "low-power S0" platform and the low-power S0 _DSM is present.
> + */
> + acpi_enable_all_wakeup_gpes();
> + acpi_os_wait_events_complete();
> + }
> if (acpi_sci_irq_valid())
> enable_irq_wake(acpi_sci_irq);
>
> @@ -700,7 +788,12 @@ static void acpi_freeze_restore(void)
> if (acpi_sci_irq_valid())
> disable_irq_wake(acpi_sci_irq);
>
> - acpi_enable_all_runtime_gpes();
> + if (lps0_device_handle) {
> + acpi_sleep_run_lps0_dsm(ACPI_LPS0_EXIT);
> + acpi_sleep_run_lps0_dsm(ACPI_LPS0_SCREEN_ON);
> + } else {
> + acpi_enable_all_runtime_gpes();
> + }
> }
>
> static void acpi_freeze_end(void)
> @@ -727,11 +820,14 @@ static void acpi_sleep_suspend_setup(voi
>
> suspend_set_ops(old_suspend_ordering ?
> &acpi_suspend_ops_old : &acpi_suspend_ops);
> +
> + acpi_scan_add_handler(&lps0_handler);
> freeze_set_ops(&acpi_freeze_ops);
> }
>
> #else /* !CONFIG_SUSPEND */
> #define s2idle_wakeup (false)
> +#define lps0_device_handle (NULL)
> static inline void acpi_sleep_suspend_setup(void) {}
> #endif /* !CONFIG_SUSPEND */
>
> @@ -740,6 +836,11 @@ bool acpi_s2idle_wakeup(void)
> return s2idle_wakeup;
> }
>
> +bool acpi_sleep_no_ec_events(void)
> +{
> + return pm_suspend_via_firmware() || !lps0_device_handle;
> +}
> +
> #ifdef CONFIG_PM_SLEEP
> static u32 saved_bm_rld;
>
> Index: linux-pm/drivers/acpi/ec.c
> ===================================================================
> --- linux-pm.orig/drivers/acpi/ec.c
> +++ linux-pm/drivers/acpi/ec.c
> @@ -1835,7 +1835,7 @@ static int acpi_ec_suspend(struct device
> struct acpi_ec *ec =
> acpi_driver_data(to_acpi_device(dev));
>
> - if (ec_freeze_events)
> + if (acpi_sleep_no_ec_events() && ec_freeze_events)
> acpi_ec_disable_event(ec);
> return 0;
> }

I just notice a slight pontential issue.
Should we add a similar change to acpi_ec_stop()?
acpi_ec_stop() will be invoked by acpi_block_transactions(). When
ec_freeze_events=Y, acpi_ec_suspend() takes care of disabling
event before noirq stage - I introduced this recently in order to
avoid implementing event polling mode in noirq stage while still
can fix event loss issue.
When ec_freeze_events=N, acpi_block_transactions() takes care of
disabling event after noirq stage - old EC driver logic, risking
event loss issues on some platforms.

Thanks and best regards
Lv

> Index: linux-pm/drivers/acpi/internal.h
> ===================================================================
> --- linux-pm.orig/drivers/acpi/internal.h
> +++ linux-pm/drivers/acpi/internal.h
> @@ -199,9 +199,11 @@ void acpi_ec_remove_query_handler(struct
> -------------------------------------------------------------------------- */
> #ifdef CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT
> extern bool acpi_s2idle_wakeup(void);
> +extern bool acpi_sleep_no_ec_events(void);
> extern int acpi_sleep_init(void);
> #else
> static inline bool acpi_s2idle_wakeup(void) { return false; }
> +static inline bool acpi_sleep_no_ec_events(void) { return true; }
> static inline int acpi_sleep_init(void) { return -ENXIO; }
> #endif
>

\
 
 \ /
  Last update: 2017-06-23 08:31    [W:0.343 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site