lkml.org 
[lkml]   [2017]   [Jun]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH NET v3 1/2] net: phy: Add phy loopback support in net phy framework
From
Date
Hi, Andrew

On 2017/6/24 11:12, Andrew Lunn wrote:
>> +int phy_loopback(struct phy_device *phydev, bool enable)
>> +{
>> + struct phy_driver *phydrv = to_phy_driver(phydev->mdio.dev.driver);
>> + int ret = 0;
>> +
>> + if (enable && phydev->loopback_enabled)
>> + return -EBUSY;
>> +
>> + if (!enable && !phydev->loopback_enabled)
>> + return -EINVAL;
>> +
>> + if (phydev->drv && phydrv->set_loopback)
>> + ret = phydrv->set_loopback(phydev, enable);
>
> else
> ret = -EOPNOTSUPP;
>
>> +
>> + if (ret)
>> + return ret;
>> +
>> + phydev->loopback_enabled = enable;
>> +
>> + return 0;
>> +}
>> +EXPORT_SYMBOL(phy_loopback);
>
> One of the comments we made of the PHY code in the hns driver is that
> its locking is completely broken. You have made the same error
> here. The core needs to hold the mutex while calling into the PHY
> driver.
Do you mean hns_nic_config_phy_loopback need to hold the mutex while
calling phy_loopback? and other place that calling phy_* function?

Best Regards
Yunsheng Lin

\
 
 \ /
  Last update: 2017-06-24 05:41    [W:0.064 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site