lkml.org 
[lkml]   [2017]   [Jun]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
The driver attempts to 'select MDIO_DEVICE', but the code
is actually a loadable module when PHYLIB=m:

drivers/phy/broadcom/phy-bcm-ns-usb3.o: In function `bcm_ns_usb3_mdiodev_phy_write':
phy-bcm-ns-usb3.c:(.text.bcm_ns_usb3_mdiodev_phy_write+0x28): undefined reference to `mdiobus_write'
drivers/phy/broadcom/phy-bcm-ns-usb3.o: In function `bcm_ns_usb3_module_exit':
phy-bcm-ns-usb3.c:(.exit.text+0x18): undefined reference to `mdio_driver_unregister'
drivers/phy/broadcom/phy-bcm-ns-usb3.o: In function `bcm_ns_usb3_module_init':
phy-bcm-ns-usb3.c:(.init.text+0x18): undefined reference to `mdio_driver_register'
phy-bcm-ns-usb3.c:(.init.text+0x38): undefined reference to `mdio_driver_unregister'

Using 'depends on MDIO_BUS' instead will avoid the link error.

Fixes: af850e14a7ae ("phy: bcm-ns-usb3: add MDIO driver using proper bus layer")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/phy/broadcom/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/phy/broadcom/Kconfig b/drivers/phy/broadcom/Kconfig
index 37371b89b14f..64fc59c3ae6d 100644
--- a/drivers/phy/broadcom/Kconfig
+++ b/drivers/phy/broadcom/Kconfig
@@ -30,8 +30,8 @@ config PHY_BCM_NS_USB3
tristate "Broadcom Northstar USB 3.0 PHY Driver"
depends on ARCH_BCM_IPROC || COMPILE_TEST
depends on HAS_IOMEM && OF
+ depends on MDIO_BUS
select GENERIC_PHY
- select MDIO_DEVICE
help
Enable this to support Broadcom USB 3.0 PHY connected to the USB
controller on Northstar family.
--
2.9.0
\
 
 \ /
  Last update: 2017-06-22 19:59    [W:0.213 / U:0.360 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site