lkml.org 
[lkml]   [2017]   [Jun]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
On 06/19/2017 10:26 AM, Markus Mayer wrote:
> On 18 June 2017 at 07:05, Rob Herring <robh@kernel.org> wrote:
>> On Tue, Jun 13, 2017 at 03:37:09PM -0700, Markus Mayer wrote:
>>> From: Markus Mayer <mmayer@broadcom.com>
>>>
>>> Provide bindings for the Broadcom STB DDR PHY Front End (DPFE).
>>>
>>> Signed-off-by: Markus Mayer <mmayer@broadcom.com>
>>> ---
>>> .../devicetree/bindings/soc/bcm/brcm,dpfe-cpu.txt | 27 ++++++++++++++++++++++
>>> 1 file changed, 27 insertions(+)
>>> create mode 100644 Documentation/devicetree/bindings/soc/bcm/brcm,dpfe-cpu.txt
>>
>> Acked-by: Rob Herring <robh@kernel.org>
>
> Thanks, Rob.
>
> To bring up the previous discussion regarding enumerating multiple
> nodes (so far we need two dpfe nodes for some platforms), how should
> we go about this? We were originally proposing to use "cell-index",
> but you said this was OpenFirmware only and couldn't be used in device
> tree. See https://lkml.org/lkml/2017/4/27/574.
>
> We do need to use something, because the driver needs to know if it
> should be accessing dpfe0 or dpfe1. What should we use?

Would aliases work for instance for that purpose?
--
Florian

\
 
 \ /
  Last update: 2017-06-22 19:58    [W:0.059 / U:0.520 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site