lkml.org 
[lkml]   [2017]   [Jun]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
On Wed, Jun 21, 2017 at 6:38 AM, Thomas Gleixner <tglx@linutronix.de> wrote:
> On Tue, 20 Jun 2017, Andy Lutomirski wrote:
>> This patch uses PCID differently. We use a PCID to identify a
>> recently-used mm on a per-cpu basis. An mm has no fixed PCID
>> binding at all; instead, we give it a fresh PCID each time it's
>> loaded except in cases where we want to preserve the TLB, in which
>> case we reuse a recent value.
>>
>> This seems to save about 100ns on context switches between mms.
>
> Depending on the work load I assume. For a CPU switching between a large
> number of processes consecutively it won't make a change. In fact it will
> be slower due to the extra few cycles required for rotating the asid, but I
> doubt that this can be measured.

True. I suspect this can be improved -- see below.

>
>> +/*
>> + * 6 because 6 should be plenty and struct tlb_state will fit in
>> + * two cache lines.
>> + */
>> +#define NR_DYNAMIC_ASIDS 6
>
> That requires a conditional branch
>
> if (asid >= NR_DYNAMIC_ASIDS) {
> asid = 0;
> ....
> }
>
> The question is whether 4 IDs would be sufficient which trades the branch
> for a mask operation. Or you go for 8 and spend another cache line.

Interesting. I'm inclined to either leave it at 6 or reduce it to 4
for now and to optimize later.

>
>> atomic64_t last_mm_ctx_id = ATOMIC64_INIT(1);
>>
>> +static void choose_new_asid(struct mm_struct *next, u64 next_tlb_gen,
>> + u16 *new_asid, bool *need_flush)
>> +{
>> + u16 asid;
>> +
>> + if (!static_cpu_has(X86_FEATURE_PCID)) {
>> + *new_asid = 0;
>> + *need_flush = true;
>> + return;
>> + }
>> +
>> + for (asid = 0; asid < NR_DYNAMIC_ASIDS; asid++) {
>> + if (this_cpu_read(cpu_tlbstate.ctxs[asid].ctx_id) !=
>> + next->context.ctx_id)
>> + continue;
>> +
>> + *new_asid = asid;
>> + *need_flush = (this_cpu_read(cpu_tlbstate.ctxs[asid].tlb_gen) <
>> + next_tlb_gen);
>> + return;
>> + }
>
> Hmm. So this loop needs to be taken unconditionally even if the task stays
> on the same CPU. And of course the number of dynamic IDs has to be short in
> order to makes this loop suck performance wise.
>
> Something like the completely disfunctional below might be worthwhile to
> explore. At least arch/x86/mm/ compiles :)
>
> It gets rid of the loop search and lifts the limit of dynamic ids by
> trading it with a percpu variable in mm_context_t.

That would work, but it would take a lot more memory on large systems
with lots of processes, and I'd also be concerned that we might run
out of dynamic percpu space.

How about a different idea: make the percpu data structure look like a
4-way set associative cache. The ctxs array could be, say, 1024
entries long without using crazy amounts of memory. We'd divide it
into 256 buckets, so you'd index it like ctxs[4*bucket + slot]. For
each mm, we choose a random bucket (from 0 through 256), and then we'd
just loop over the four slots in the bucket in choose_asid(). This
would require very slightly more arithmetic (I'd guess only one or two
cycles, though) but, critically, wouldn't touch any more cachelines.

The downside of both of these approaches over the one in this patch is
that the change that the percpu cacheline we need is not in the cache
is quite a bit higher since it's potentially a different cacheline for
each mm. It would probably still be a win because avoiding the flush
is really quite valuable.

What do you think? The added code would be tiny.

(P.S. Why doesn't random_p32() try arch_random_int()?)

--Andy

\
 
 \ /
  Last update: 2017-06-22 20:00    [W:0.158 / U:0.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site