lkml.org 
[lkml]   [2017]   [Jun]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: hwmon: pwm-fan: switch to new atomic PWM API
On Mon, Apr 24, 2017 at 03:13:17PM +0200, Bartlomiej Zolnierkiewicz wrote:
> Switch pwm-fan driver to new atomic PWM API.
>
> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
> ---
> Depends on "[PATCH v2 0/3] pwm: pwm-samsung: fix suspend/resume support"
> patchset (https://www.spinics.net/lists/kernel/msg2495209.html).

I lost track where we are with this patch. The above series set did not make
it, as far as I can see. Is this patch truly dependent on that series, or
can it be applied separately ? It does apply cleanly.

Thanks,
Guenter

>
> drivers/hwmon/pwm-fan.c | 68 +++++++++++++++++++------------------------------
> 1 file changed, 26 insertions(+), 42 deletions(-)
>
> diff --git a/drivers/hwmon/pwm-fan.c b/drivers/hwmon/pwm-fan.c
> index 9dc40f3..4ac7700 100644
> --- a/drivers/hwmon/pwm-fan.c
> +++ b/drivers/hwmon/pwm-fan.c
> @@ -40,31 +40,22 @@ struct pwm_fan_ctx {
>
> static int __set_pwm(struct pwm_fan_ctx *ctx, unsigned long pwm)
> {
> - struct pwm_args pargs;
> - unsigned long duty;
> + unsigned long period;
> int ret = 0;
> -
> - pwm_get_args(ctx->pwm, &pargs);
> + struct pwm_state state = { };
>
> mutex_lock(&ctx->lock);
> if (ctx->pwm_value == pwm)
> goto exit_set_pwm_err;
>
> - duty = DIV_ROUND_UP(pwm * (pargs.period - 1), MAX_PWM);
> - ret = pwm_config(ctx->pwm, duty, pargs.period);
> - if (ret)
> - goto exit_set_pwm_err;
> -
> - if (pwm == 0)
> - pwm_disable(ctx->pwm);
> + pwm_init_state(ctx->pwm, &state);
> + period = ctx->pwm->args.period;
> + state.duty_cycle = DIV_ROUND_UP(pwm * (period - 1), MAX_PWM);
> + state.enabled = pwm ? true : false;
>
> - if (ctx->pwm_value == 0) {
> - ret = pwm_enable(ctx->pwm);
> - if (ret)
> - goto exit_set_pwm_err;
> - }
> -
> - ctx->pwm_value = pwm;
> + ret = pwm_apply_state(ctx->pwm, &state);
> + if (!ret)
> + ctx->pwm_value = pwm;
> exit_set_pwm_err:
> mutex_unlock(&ctx->lock);
> return ret;
> @@ -218,10 +209,9 @@ static int pwm_fan_probe(struct platform_device *pdev)
> {
> struct thermal_cooling_device *cdev;
> struct pwm_fan_ctx *ctx;
> - struct pwm_args pargs;
> struct device *hwmon;
> - int duty_cycle;
> int ret;
> + struct pwm_state state = { };
>
> ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
> if (!ctx)
> @@ -237,28 +227,16 @@ static int pwm_fan_probe(struct platform_device *pdev)
>
> platform_set_drvdata(pdev, ctx);
>
> - /*
> - * FIXME: pwm_apply_args() should be removed when switching to the
> - * atomic PWM API.
> - */
> - pwm_apply_args(ctx->pwm);
> -
> - /* Set duty cycle to maximum allowed */
> - pwm_get_args(ctx->pwm, &pargs);
> -
> - duty_cycle = pargs.period - 1;
> ctx->pwm_value = MAX_PWM;
>
> - ret = pwm_config(ctx->pwm, duty_cycle, pargs.period);
> - if (ret) {
> - dev_err(&pdev->dev, "Failed to configure PWM\n");
> - return ret;
> - }
> + /* Set duty cycle to maximum allowed and enable PWM output */
> + pwm_init_state(ctx->pwm, &state);
> + state.duty_cycle = ctx->pwm->args.period - 1;
> + state.enabled = true;
>
> - /* Enbale PWM output */
> - ret = pwm_enable(ctx->pwm);
> + ret = pwm_apply_state(ctx->pwm, &state);
> if (ret) {
> - dev_err(&pdev->dev, "Failed to enable PWM\n");
> + dev_err(&pdev->dev, "Failed to configure PWM\n");
> return ret;
> }
>
> @@ -266,8 +244,8 @@ static int pwm_fan_probe(struct platform_device *pdev)
> ctx, pwm_fan_groups);
> if (IS_ERR(hwmon)) {
> dev_err(&pdev->dev, "Failed to register hwmon device\n");
> - pwm_disable(ctx->pwm);
> - return PTR_ERR(hwmon);
> + ret = PTR_ERR(hwmon);
> + goto err_pwm_disable;
> }
>
> ret = pwm_fan_of_get_cooling_data(&pdev->dev, ctx);
> @@ -282,14 +260,20 @@ static int pwm_fan_probe(struct platform_device *pdev)
> if (IS_ERR(cdev)) {
> dev_err(&pdev->dev,
> "Failed to register pwm-fan as cooling device");
> - pwm_disable(ctx->pwm);
> - return PTR_ERR(cdev);
> + ret = PTR_ERR(cdev);
> + goto err_pwm_disable;
> }
> ctx->cdev = cdev;
> thermal_cdev_update(cdev);
> }
>
> return 0;
> +
> +err_pwm_disable:
> + state.enabled = false;
> + pwm_apply_state(ctx->pwm, &state);
> +
> + return ret;
> }
>
> static int pwm_fan_remove(struct platform_device *pdev)

\
 
 \ /
  Last update: 2017-06-05 00:13    [W:0.109 / U:0.564 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site