lkml.org 
[lkml]   [2017]   [Jun]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH V2] ARM: cpuidle: Support asymmetric idle definition
From
Date
On 02/06/2017 11:39, Sudeep Holla wrote:
>
>
> On 02/06/17 10:25, Daniel Lezcano wrote:
>> On 02/06/2017 11:20, Sudeep Holla wrote:
>>>
>>>
>>> On 01/06/17 12:39, Daniel Lezcano wrote:
>>>> Some hardware have clusters with different idle states. The current code does
>>>> not support this and fails as it expects all the idle states to be identical.
>>>>
>>>> Because of this, the Mediatek mtk8173 had to create the same idle state for a
>>>> big.Little system and now the Hisilicon 960 is facing the same situation.
>>>>
>>>> Solve this by simply assuming the multiple driver will be needed for all the
>>>> platforms using the ARM generic cpuidle driver which makes sense because of the
>>>> different topologies we can support with a single kernel for ARM32 or ARM64.
>>>>
>>>> Every CPU has its own driver, so every single CPU can specify in the DT the
>>>> idle states.
>>>>
>>>> This simple approach allows to support the future dynamIQ system, current SMP
>>>> and HMP.
>>>>
>>>> It is unoptimal from a memory point of view for a system with a large number of
>>>> CPUs but nowadays there is no such system with a cpuidle driver on ARM.
>>>>
>>>
>>> While I agree this may be simple solution, but just not necessary for
>>> systems with symmetric idle states especially one with large number of
>>> CPUs. I don't like to see 96 CPU Idle driver on say ThunderX. So we
>>> *must* have some basic distinction done here.
>>>
>>> IMO, we can't punish a large SMP systems just because they don't have
>>> asymmetric idle states.
>>
>> Can you point me in the upstream kernel a DTS with 96 cpus and using the
>> cpuidle-arm driver ?
>>
>
> The bindings are upstream right. Not all DTS are upstream, firmware
> generate them especially for large systems.
>
> Check arch/arm64/boot/dts/cavium/thunder{,2}-{88,99}xx.dtsi, it has
> supports PSCI and firmware can update DTB to add the idle states.
> They are systems with 96 and 128 CPUs.

Ok, so I have to assume there are out of tree DTB with idle state
definitions. In other circumstances I would have just ignored this
argument but I can admit the DTB blob thing is in the grey area between
what we have to support upstream and out of tree changes.

However, even if it is suboptimal, I'm convinced doing a per-cpu driver
makes more sense.

You said, we punish large SMP systems, I don't think it is true,
especially from a performance point of view. Do you have access to such
hardware to check if it is correct?

We have more memory used but it is not related on how we implement the
driver above but on the fixed array size in the cpuidle structures.

I can take care of optimizing the memory usage in the cpuidle framework
which will benefit all architectures but that will take some time.

So can you consider acking this patch, so that unblocks other HMP idle
development and I take care of optimizing the structure memory usage?



--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

\
 
 \ /
  Last update: 2017-06-05 00:10    [W:0.155 / U:0.900 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site