lkml.org 
[lkml]   [2017]   [Jun]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2] gpio: lp87565: Add support for GPIO
From
Date


On Thursday 15 June 2017 12:03 PM, Keerthy wrote:
> Add driver for lp87565 PMIC family GPIOs. Three GPIOs are supported
> and can be configured in Open-drain output or Push-pull output.
>
> Signed-off-by: Keerthy <j-keerthy@ti.com>
> ---
>
> Latest version of mfd patch:
>
> https://patchwork.kernel.org/patch/9783079/

The latest version is pulled by Lee Jones.

https://patchwork.kernel.org/patch/9783081/

Thanks,
Keerthy
>
> Changes in v2:
>
> * included <linux/gpio/driver.h>
> * stored the struct regmap *map instead of whole lp87565 struct
> * clamped return values to [0,1] where necessary.
> * Added more comments to explain the 2 modes.
> * platform_set_drvdata(pdev, gpio)
>
> drivers/gpio/Kconfig | 10 +++
> drivers/gpio/Makefile | 1 +
> drivers/gpio/gpio-lp87565.c | 190 ++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 201 insertions(+)
> create mode 100644 drivers/gpio/gpio-lp87565.c
>
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index 2e7d9ff..f235eae 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -965,6 +965,16 @@ config GPIO_LP873X
> This driver can also be built as a module. If so, the module will be
> called gpio-lp873x.
>
> +config GPIO_LP87565
> + tristate "TI LP87565 GPIO"
> + depends on MFD_TI_LP87565
> + help
> + This driver supports the GPIO on TI Lp873565 PMICs. 3 GPIOs are present
> + on LP87565 PMICs.
> +
> + This driver can also be built as a module. If so, the module will be
> + called gpio-lp87565.
> +
> config GPIO_MAX77620
> tristate "GPIO support for PMIC MAX77620 and MAX20024"
> depends on MFD_MAX77620
> diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
> index bcd0a0b..a9fda6c 100644
> --- a/drivers/gpio/Makefile
> +++ b/drivers/gpio/Makefile
> @@ -67,6 +67,7 @@ obj-$(CONFIG_GPIO_LP3943) += gpio-lp3943.o
> obj-$(CONFIG_GPIO_LPC18XX) += gpio-lpc18xx.o
> obj-$(CONFIG_ARCH_LPC32XX) += gpio-lpc32xx.o
> obj-$(CONFIG_GPIO_LP873X) += gpio-lp873x.o
> +obj-$(CONFIG_GPIO_LP87565) += gpio-lp87565.o
> obj-$(CONFIG_GPIO_LYNXPOINT) += gpio-lynxpoint.o
> obj-$(CONFIG_GPIO_MAX730X) += gpio-max730x.o
> obj-$(CONFIG_GPIO_MAX7300) += gpio-max7300.o
> diff --git a/drivers/gpio/gpio-lp87565.c b/drivers/gpio/gpio-lp87565.c
> new file mode 100644
> index 0000000..6313c50
> --- /dev/null
> +++ b/drivers/gpio/gpio-lp87565.c
> @@ -0,0 +1,190 @@
> +/*
> + * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
> + * Keerthy <j-keerthy@ti.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> + * kind, whether expressed or implied; without even the implied warranty
> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License version 2 for more details.
> + *
> + * Based on the LP873X driver
> + */
> +
> +#include <linux/gpio/driver.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +
> +#include <linux/mfd/lp87565.h>
> +
> +struct lp87565_gpio {
> + struct gpio_chip chip;
> + struct regmap *map;
> +};
> +
> +static int lp87565_gpio_get_direction(struct gpio_chip *chip,
> + unsigned int offset)
> +{
> + struct lp87565_gpio *gpio = gpiochip_get_data(chip);
> + int ret, val;
> +
> + ret = regmap_read(gpio->map, LP87565_REG_GPIO_CONFIG, &val);
> + if (ret < 0)
> + return ret;
> +
> + return !(val & BIT(offset));
> +}
> +
> +static int lp87565_gpio_direction_input(struct gpio_chip *chip,
> + unsigned int offset)
> +{
> + struct lp87565_gpio *gpio = gpiochip_get_data(chip);
> +
> + return regmap_update_bits(gpio->map,
> + LP87565_REG_GPIO_CONFIG,
> + BIT(offset), 0);
> +}
> +
> +static int lp87565_gpio_direction_output(struct gpio_chip *chip,
> + unsigned int offset, int value)
> +{
> + struct lp87565_gpio *gpio = gpiochip_get_data(chip);
> +
> + return regmap_update_bits(gpio->map,
> + LP87565_REG_GPIO_CONFIG,
> + BIT(offset), !value ? BIT(offset) : 0);
> +}
> +
> +static int lp87565_gpio_get(struct gpio_chip *chip, unsigned int offset)
> +{
> + struct lp87565_gpio *gpio = gpiochip_get_data(chip);
> + int ret, val;
> +
> + ret = regmap_read(gpio->map, LP87565_REG_GPIO_IN, &val);
> + if (ret < 0)
> + return ret;
> +
> + return !!(val & BIT(offset));
> +}
> +
> +static void lp87565_gpio_set(struct gpio_chip *chip, unsigned int offset,
> + int value)
> +{
> + struct lp87565_gpio *gpio = gpiochip_get_data(chip);
> +
> + regmap_update_bits(gpio->map, LP87565_REG_GPIO_OUT,
> + BIT(offset), value ? BIT(offset) : 0);
> +}
> +
> +static int lp87565_gpio_request(struct gpio_chip *gc, unsigned int offset)
> +{
> + struct lp87565_gpio *gpio = gpiochip_get_data(gc);
> + int ret;
> +
> + switch (offset) {
> + case 0:
> + case 1:
> + case 2:
> + /*
> + * MUX can program the pin to be in EN1/2/3 pin mode
> + * Or GPIO1/2/3 mode.
> + * Setup the GPIO*_SEL MUX to GPIO mode
> + */
> + ret = regmap_update_bits(gpio->map,
> + LP87565_REG_PIN_FUNCTION,
> + BIT(offset), BIT(offset));
> + if (ret)
> + return ret;
> +
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static int lp87565_gpio_set_config(struct gpio_chip *gc, unsigned int offset,
> + unsigned long config)
> +{
> + struct lp87565_gpio *gpio = gpiochip_get_data(gc);
> +
> + switch (pinconf_to_config_param(config)) {
> + case PIN_CONFIG_DRIVE_OPEN_DRAIN:
> + return regmap_update_bits(gpio->map,
> + LP87565_REG_GPIO_CONFIG,
> + BIT(offset +
> + __ffs(LP87565_GOIO1_OD)),
> + BIT(offset +
> + __ffs(LP87565_GOIO1_OD)));
> + case PIN_CONFIG_DRIVE_PUSH_PULL:
> + return regmap_update_bits(gpio->map,
> + LP87565_REG_GPIO_CONFIG,
> + BIT(offset +
> + __ffs(LP87565_GOIO1_OD)), 0);
> + default:
> + return -ENOTSUPP;
> + }
> +}
> +
> +static const struct gpio_chip template_chip = {
> + .label = "lp87565-gpio",
> + .owner = THIS_MODULE,
> + .request = lp87565_gpio_request,
> + .get_direction = lp87565_gpio_get_direction,
> + .direction_input = lp87565_gpio_direction_input,
> + .direction_output = lp87565_gpio_direction_output,
> + .get = lp87565_gpio_get,
> + .set = lp87565_gpio_set,
> + .set_config = lp87565_gpio_set_config,
> + .base = -1,
> + .ngpio = 3,
> + .can_sleep = true,
> +};
> +
> +static int lp87565_gpio_probe(struct platform_device *pdev)
> +{
> + struct lp87565_gpio *gpio;
> + struct lp87565 *lp87565;
> + int ret;
> +
> + gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
> + if (!gpio)
> + return -ENOMEM;
> +
> + lp87565 = dev_get_drvdata(pdev->dev.parent);
> + gpio->chip = template_chip;
> + gpio->chip.parent = lp87565->dev;
> + gpio->map = lp87565->regmap;
> +
> + ret = devm_gpiochip_add_data(&pdev->dev, &gpio->chip, gpio);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static const struct platform_device_id lp87565_gpio_id_table[] = {
> + { "lp87565-q1-gpio", },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(platform, lp87565_gpio_id_table);
> +
> +static struct platform_driver lp87565_gpio_driver = {
> + .driver = {
> + .name = "lp87565-gpio",
> + },
> + .probe = lp87565_gpio_probe,
> + .id_table = lp87565_gpio_id_table,
> +};
> +module_platform_driver(lp87565_gpio_driver);
> +
> +MODULE_AUTHOR("Keerthy <j-keerthy@ti.com>");
> +MODULE_DESCRIPTION("LP87565 GPIO driver");
> +MODULE_LICENSE("GPL v2");
>

\
 
 \ /
  Last update: 2017-06-20 05:24    [W:0.053 / U:1.228 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site