Messages in this thread Patch in this message | | | From | Sudip Mukherjee <> | Subject | [PATCH] parport_serial: Add support for WCH CH382L PCI-E single parallel port card. | Date | Sat, 17 Jun 2017 14:02:59 +0100 |
| |
From: Alexander Gerasiov <gq@redlab-i.ru>
WCH CH382L is a PCI-E adapter with 1 parallel port. It is similair to CH382 but serial ports are not soldered on board. Detected as Serial controller: Device 1c00:3050 (rev 10) (prog-if 05 [16850])
Signed-off-by: Alexander Gerasiov <gq@redlab-i.ru> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> --- drivers/parport/parport_serial.c | 9 +++++++++ 1 file changed, 9 insertions(+)
diff --git a/drivers/parport/parport_serial.c b/drivers/parport/parport_serial.c index e15b484..f26fc87 100644 --- a/drivers/parport/parport_serial.c +++ b/drivers/parport/parport_serial.c @@ -65,6 +65,7 @@ enum parport_pc_pci_cards { wch_ch353_1s1p, wch_ch353_2s1p, wch_ch382_2s1p, + wch_ch382_0s1p, sunix_2s1p, }; @@ -153,6 +154,7 @@ static int netmos_parallel_init(struct pci_dev *dev, struct parport_pc_pci *par, /* wch_ch353_1s1p*/ { 1, { { 1, -1}, } }, /* wch_ch353_2s1p*/ { 1, { { 2, -1}, } }, /* wch_ch382_2s1p*/ { 1, { { 2, -1}, } }, + /* wch_ch382_0s1p*/ { 1, { { 2, -1}, } }, /* sunix_2s1p */ { 1, { { 3, -1 }, } }, }; @@ -260,6 +262,7 @@ static int netmos_parallel_init(struct pci_dev *dev, struct parport_pc_pci *par, { 0x4348, 0x5053, PCI_ANY_ID, PCI_ANY_ID, 0, 0, wch_ch353_1s1p}, { 0x4348, 0x7053, 0x4348, 0x3253, 0, 0, wch_ch353_2s1p}, { 0x1c00, 0x3250, 0x1c00, 0x3250, 0, 0, wch_ch382_2s1p}, + { 0x1c00, 0x3050, 0x1c00, 0x3050, 0, 0, wch_ch382_0s1p}, /* * More SUNIX variations. At least one of these has part number @@ -504,6 +507,12 @@ static int netmos_parallel_init(struct pci_dev *dev, struct parport_pc_pci *par, .uart_offset = 8, .first_offset = 0xC0, }, + [wch_ch382_0s1p] = { + .flags = FL_BASE0, + .num_ports = 0, + .base_baud = 115200, + .uart_offset = 8, + }, [sunix_2s1p] = { .flags = FL_BASE0|FL_BASE_BARS, .num_ports = 2, -- 1.9.1
| |