lkml.org 
[lkml]   [2017]   [Jun]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v6 7/8] arm64: dts: hikey960: add device node for pmic and regulators
From
Date
Hi Guodong,

On 2017/6/8 23:08, Guodong Xu wrote:
> From: Wang Xiaoyin <hw.wangxiaoyin@hisilicon.com>
>
> add device node for hi6421 pmic core and hi6421v530
> voltage regulator,include LDO(1,3,9,11,15,16)
>
> Signed-off-by: Wang Xiaoyin <hw.wangxiaoyin@hisilicon.com>
> Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
> Acked-by: Arnd Bergmann <arnd@arndb.de>

Thanks!
Acked-by: Wei Xu <xuwei5@hisilicon.com>

So the whole patch set can be picked up by the Lee
to avoid dependence issue.

BR,
Wei

> ---
> arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 46 +++++++++++++++++++++++
> 1 file changed, 46 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
> index ca448f0..e579333 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
> +++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
> @@ -97,6 +97,52 @@
> default-state = "off";
> };
> };
> +
> + pmic: pmic@fff34000 {
> + compatible = "hisilicon,hi6421v530-pmic";
> + reg = <0x0 0xfff34000 0x0 0x1000>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> +
> + regulators {
> + ldo3: LDO3 { /* HDMI */
> + regulator-name = "VOUT3_1V85";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2200000>;
> + regulator-enable-ramp-delay = <120>;
> + };
> +
> + ldo9: LDO9 { /* SDCARD I/O */
> + regulator-name = "VOUT9_1V8_2V95";
> + regulator-min-microvolt = <1750000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-enable-ramp-delay = <240>;
> + };
> +
> + ldo11: LDO11 { /* Low Speed Connector */
> + regulator-name = "VOUT11_1V8_2V95";
> + regulator-min-microvolt = <1750000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-enable-ramp-delay = <240>;
> + };
> +
> + ldo15: LDO15 { /* UFS VCC */
> + regulator-name = "VOUT15_3V0";
> + regulator-min-microvolt = <1750000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-enable-ramp-delay = <120>;
> + };
> +
> + ldo16: LDO16 { /* SD VDD */
> + regulator-name = "VOUT16_2V95";
> + regulator-min-microvolt = <1750000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-enable-ramp-delay = <360>;
> + };
> + };
> + };
> };
>
> &i2c0 {
>

\
 
 \ /
  Last update: 2017-06-15 17:06    [W:0.140 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site