lkml.org 
[lkml]   [2017]   [Jun]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v2 4/4] ARM: dts: exynos: Remove the display-timing and delay from rinato dts
    Date
    The display-timing and delay are included in the panel driver. So it
    should be removed in dts.

    Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
    ---
    arch/arm/boot/dts/exynos3250-rinato.dts | 22 ----------------------
    1 file changed, 22 deletions(-)

    diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
    index de2702e..3df88383 100644
    --- a/arch/arm/boot/dts/exynos3250-rinato.dts
    +++ b/arch/arm/boot/dts/exynos3250-rinato.dts
    @@ -227,28 +227,6 @@
    vci-supply = <&ldo20_reg>;
    reset-gpios = <&gpe0 1 GPIO_ACTIVE_LOW>;
    te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
    - power-on-delay= <30>;
    - power-off-delay= <120>;
    - reset-delay = <5>;
    - init-delay = <100>;
    - flip-horizontal;
    - flip-vertical;
    - panel-width-mm = <29>;
    - panel-height-mm = <29>;
    -
    - display-timings {
    - timing-0 {
    - clock-frequency = <4600000>;
    - hactive = <320>;
    - vactive = <320>;
    - hfront-porch = <1>;
    - hback-porch = <1>;
    - hsync-len = <1>;
    - vfront-porch = <150>;
    - vback-porch = <1>;
    - vsync-len = <2>;
    - };
    - };
    };
    };

    --
    1.9.1
    \
     
     \ /
      Last update: 2017-06-15 12:05    [W:2.175 / U:0.032 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site