Messages in this thread | | | From | Hoegeun Kwon <> | Subject | [PATCH v2 0/4] Add support for the s6e63j0x03 panel on Rinato board | Date | Thu, 15 Jun 2017 19:03:26 +0900 |
| |
Hi all,
The purpose of this patch is add support for s6e63j0x03 AMOLED panel on the rinato board(Samsung Galaxy Gear 2).
Changes for V2: - Added the interface info in binding document. - Added Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> (1/3 patch). - Added Acked-by: Rob Herring <robh@kernel.org> (1/3 patch). - Fixed the tristate of config from video mode to command mode. - Fixed the reset gpios from active high to low from rinato dts. - Fixed a lot of things in panel driver, reflect Andrzej's review.
Best regards, Hoegeun
Hoegeun Kwon (4): dt-bindings: Add support for samsung s6e63j0x03 panel binding drm/panel: Add support for s6e63j0x03 panel driver ARM: dts: exynos: Fix the active of reset gpios from rinato dts ARM: dts: exynos: Remove the display-timing and delay from rinato dts
.../bindings/display/panel/samsung,s6e63j0x03.txt | 24 ++ arch/arm/boot/dts/exynos3250-rinato.dts | 24 +- drivers/gpu/drm/panel/Kconfig | 7 + drivers/gpu/drm/panel/Makefile | 1 + drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c | 476 +++++++++++++++++++++ 5 files changed, 509 insertions(+), 23 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6e63j0x03.txt create mode 100644 drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c
-- 1.9.1
| |