lkml.org 
[lkml]   [2017]   [Jun]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 00/11] ARM: dts: imx6qdl: video capture support
On Mon, Jun 12, 2017 at 11:23:53AM -0700, Steve Longerbeam wrote:
> This series defines the i.MX6 internal video multiplexers and MIPI CSI-2
> receiver device nodes, and their connections to eachother and the i.MX6
> IPU CSI ports.
>
> It also implements video capture support on the SabreLite, SabreSD, and
> SabreAuto reference platforms, by defining the video sensor nodes on those
> platforms, and their connections to the video muxes and MIPI CSI-2 receiver.
>
> There should not be much of anything controversial in this series. The
> imx-media driver is set to be merged in time for 4.13, so please accept
> this series soon.
>
>
> Philipp Zabel (2):
> ARM: dts: imx6qdl: add multiplexer controls
> ARM: dts: imx6qdl: Add video multiplexers, mipi_csi, and their
> connections
>
> Steve Longerbeam (9):
> ARM: dts: imx6qdl: Add compatible, clocks, irqs to MIPI CSI-2 node
> ARM: dts: imx6qdl: add capture-subsystem device
> ARM: dts: imx6qdl-sabrelite: remove erratum ERR006687 workaround
> ARM: dts: imx6-sabrelite: add OV5642 and OV5640 camera sensors
> ARM: dts: imx6-sabresd: add OV5642 and OV5640 camera sensors
> ARM: dts: imx6-sabreauto: create i2cmux for i2c3
> ARM: dts: imx6-sabreauto: add reset-gpios property for max7310_b
> ARM: dts: imx6-sabreauto: add pinctrl for gpt input capture
> ARM: dts: imx6-sabreauto: add the ADV7180 video decoder

Applied all, thanks.

\
 
 \ /
  Last update: 2017-06-14 17:12    [W:0.074 / U:0.636 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site