lkml.org 
[lkml]   [2017]   [Jun]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 1/9] ARM: dts: imx6ul-isiot: Add Sound card with codec node
On Fri, Apr 7, 2017 at 6:46 PM, Shawn Guo <shawnguo@kernel.org> wrote:
> On Thu, Apr 06, 2017 at 11:32:07PM +0530, Jagan Teki wrote:
>> From: Jagan Teki <jagan@amarulasolutions.com>
>>
>> Add support for Sound card and related codec(via i2c1) nodes
>> on Engicam Is.IoT MX6UL variant module boards.
>>
>> Cc: Shawn Guo <shawnguo@kernel.org>
>> Cc: Matteo Lisi <matteo.lisi@engicam.com>
>> Cc: Michael Trimarchi <michael@amarulasolutions.com>
>> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
>> ---
>> Changes for v3:
>> - Replace fsl,imx-audio-sgtl5000 and use simple-audio-card
>> Changes for v2:
>> - Use proper [label:] node-name[@unit-address] for codec
>> - Remove incorrect codec property 'wlf,shared-lrclk'
>> - Remove 'gpr' from sound card node
>>
>> arch/arm/boot/dts/imx6ul-isiot-common.dtsi | 10 +++++++
>> arch/arm/boot/dts/imx6ul-isiot.dtsi | 44 ++++++++++++++++++++++++++++++
>
> Can you help me understand how these two files are related? Why is
> sgtl5000 added into one and sound node added into the other?

lcdif, ts and sound card which may differ based on the base-board
connected with SOM, So I moved these stuff which are related to
Starter kit supported once's and used with SOM dts files. if some
other board with same SOM can have different lcdif and etc so they can
define locally to dts.

thanks!
--
Jagan Teki
Senior Linux Kernel Engineer | Amarula Solutions
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.

\
 
 \ /
  Last update: 2017-06-14 16:48    [W:0.071 / U:0.776 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site